Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

A-Tech

A-Tech 2GB (2x1GB) DDR2 667MHz DIMM PC2-5300 UDIMM Non-ECC 1.8V CL5 240-Pin desktop RAM

SKU CH-HTWB-CBJ91

A 2 GB dual-channel DDR2 kit with two 1 GB DIMMs running at 667 MHz, 1.8 V, CL5 latency and 240-pin unbuffered non-ECC layout

  • Capacity2GB (2 x 1GB)
  • SpeedDDR2 667 (PC2 5300)
  • Tested Frequency667
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 2GB (2 x 1GB)

Speed DDR2 667 (PC2 5300)

  • 2GB dual-channel kit doubles memory bandwidth for smoother multitasking
  • DDR2 667 MHz speed accelerates application loading and system responsiveness
  • 8 V standard voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits a wide range of desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer desktop PCs

Kit Purpose

This A-Tech kit supplies two 1GB DDR2 modules for desktop systems that accept 240-pin unbuffered memory. The dual-channel pair targets owners of older AMD or Intel platforms needing a straightforward capacity increase.

Build And Connections

Each stick uses the standard 1.8V DDR2 voltage and a 240-pin DIMM edge connector that fits legacy desktop slots without adapters. Unbuffered non-ECC layout means the modules install like ordinary consumer RAM and require no special motherboard support.

Deciding Specification

The rated speed is DDR2 667MHz, also labelled PC2-5300, with a tested CAS latency of CL5. If your board specifies this exact frequency and voltage, the kit will operate at its advertised timing; otherwise the system will fall back to a lower supported speed.

Privalumai

  • 2GB dual-channel kit doubles memory bandwidth for smoother multitasking
  • DDR2 667 MHz speed accelerates application loading and system responsiveness
  • 8 V standard voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits a wide range of desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer desktop PCs

Specifikacijos

BrandA-Tech
SeriesA-Tech DDR2 Desktop Memory RAM
Capacity2GB (2 x 1GB)
SpeedDDR2 667 (PC2 5300)
Tested Frequency667
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What speed does the DDR2 667MHz DIMM run at in practice?

The kit operates at 667 MHz, which is the PC2-5300 standard for DDR2 DIMM memory.

What physical slot does this 240-pin DIMM require?

It fits a standard 240-pin DDR2 DIMM socket on a desktop motherboard.

How do I install the dual-channel kit and what step is often missed?

Insert both 1GB modules into matching-colour slots for dual-channel mode; the step often missed is pressing each module down until the retention clips click on both sides.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.