A-Tech 1GB DDR2 667MHz PC2-5300 UDIMM Non-ECC 1.8V CL5 240-Pin desktop RAM
- 1GB
- DDR2 667 (PC2 5300)
A-Tech
A 2 GB dual-channel DDR2 kit with two 1 GB DIMMs running at 667 MHz, 1.8 V, CL5 latency and 240-pin unbuffered non-ECC layout
Capacity 2GB (2 x 1GB)
Speed DDR2 667 (PC2 5300)
This A-Tech kit supplies two 1GB DDR2 modules for desktop systems that accept 240-pin unbuffered memory. The dual-channel pair targets owners of older AMD or Intel platforms needing a straightforward capacity increase.
Each stick uses the standard 1.8V DDR2 voltage and a 240-pin DIMM edge connector that fits legacy desktop slots without adapters. Unbuffered non-ECC layout means the modules install like ordinary consumer RAM and require no special motherboard support.
The rated speed is DDR2 667MHz, also labelled PC2-5300, with a tested CAS latency of CL5. If your board specifies this exact frequency and voltage, the kit will operate at its advertised timing; otherwise the system will fall back to a lower supported speed.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR2 Desktop Memory RAM |
| Capacity | 2GB (2 x 1GB) |
| Speed | DDR2 667 (PC2 5300) |
| Tested Frequency | 667 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Recommend Use | AMD & Intel Compatible |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The kit operates at 667 MHz, which is the PC2-5300 standard for DDR2 DIMM memory.
It fits a standard 240-pin DDR2 DIMM socket on a desktop motherboard.
Insert both 1GB modules into matching-colour slots for dual-channel mode; the step often missed is pressing each module down until the retention clips click on both sides.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?