A-Tech 1GB DDR2 533MHz PC2-4200 UDIMM Non-ECC 1.8V CL4 240-Pin desktop RAM
- 1GB
- DDR2 533 (PC2 4200)
A-Tech
A 1 GB DDR2 desktop module running at 667 MHz with CL5 latency and standard 1.8 V power
Capacity 1GB
Speed DDR2 667 (PC2 5300)
This A-Tech module is a 1GB DDR2 667MHz PC2-5300 UDIMM built for desktop computers. It runs at the standard 1.8V and uses a 240-pin unbuffered non-ECC design. The stick is tested at 667 MHz and carries CL5 latency for basic system responsiveness.
The module fits motherboards that accept DDR2 DIMMs at 667MHz with 1.8V operation. Systems requiring ECC, registered memory or a different DDR generation will not work with this part. Check your board manual for supported speed and voltage before buying.
The single specification that decides fit is the 240-pin DDR2 DIMM interface. Only motherboards with DDR2 slots keyed for 1.8V unbuffered modules can accept this upgrade.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR2 Desktop Memory RAM |
| Capacity | 1GB |
| Speed | DDR2 667 (PC2 5300) |
| Tested Frequency | 667 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Yes, this UDIMM uses the standard 240-pin DIMM form factor and requires a desktop DDR2 socket.
The module runs at the standard DDR2 voltage of 1.80V, so it aligns with other DDR2 memory operating at that level.
Check the memory speed reported in your BIOS or a system-information utility; it should show 667 MHz for this PC2-5300 module.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?