A-Tech 2GB DDR2 533MHz PC2-4200 1.8V CL4 240-Pin desktop RAM
- 2GB
- DDR2 533 (PC2 4200)
A-Tech
1 GB DDR2 800 MHz desktop DIMM, unbuffered non-ECC, 1.8 V, 240-pin, PC2-6400 rated, tested for broad AMD and Intel platform compatibility
Capacity 1GB
Speed DDR2 800 (PC2 6400)
This A-Tech module is a 1GB unbuffered DIMM built to the DDR2 800 standard (PC2-6400). It runs at the standard 1.8V voltage with CL6 latency and uses the 240-pin form factor for desktop motherboards. The kit contains a single stick tested at 800 MHz and carries no ECC or registered buffering.
The module targets older AMD and Intel desktop platforms that accept non-ECC DDR2 memory at 1.8V. Builders repairing or upgrading such systems can install it directly. Systems that require ECC, registered modules, or a different voltage cannot use this part.
Before buying, confirm the motherboard supports DDR2 800 (PC2-6400) unbuffered memory at 1.8V with 240-pin slots. If the board calls for a different DDR generation, ECC, registered DIMMs, or another voltage, this module will not fit or function.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR2 Desktop Memory RAM |
| Capacity | 1GB |
| Speed | DDR2 800 (PC2 6400) |
| Tested Frequency | 800 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Align the notch on the module with the key in the slot, press straight down until both side clips click locked, and verify the clips have fully engaged on each end.
No scheduled maintenance is required; if errors appear, reseat the module or test with a memory diagnostic before considering replacement.
The module is rated for 800 MHz operation; sustained loads will not exceed that validated frequency.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?