Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green rectangular DDR2 DIMM with black chips and gold contacts

A-Tech

A-Tech 1GB DDR2 800MHz PC2-6400 CL6 1.8V 240-Pin Desktop RAM

SKU CH-HPKJ-28A8Z

1 GB DDR2 800 MHz desktop DIMM, unbuffered non-ECC, 1.8 V, 240-pin, PC2-6400 rated, tested for broad AMD and Intel platform compatibility

  • Capacity1GB
  • SpeedDDR2 800 (PC2 6400)
  • Tested Frequency800
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 1GB

Speed DDR2 800 (PC2 6400)

  • Boosts system responsiveness with 1GB DDR2 800MHz capacity
  • Speeds up loading times using PC2-6400 rated frequency
  • Handles heavier workloads via 1.8V standard voltage operation
  • Ensures reliable performance through rigorous quality testing
  • Fits compatible desktops with 240-pin DIMM form factor

A-Tech 1GB DDR2 800MHz Desktop Module

This A-Tech module is a 1GB unbuffered DIMM built to the DDR2 800 standard (PC2-6400). It runs at the standard 1.8V voltage with CL6 latency and uses the 240-pin form factor for desktop motherboards. The kit contains a single stick tested at 800 MHz and carries no ECC or registered buffering.

Suits legacy DDR2 desktops.

The module targets older AMD and Intel desktop platforms that accept non-ECC DDR2 memory at 1.8V. Builders repairing or upgrading such systems can install it directly. Systems that require ECC, registered modules, or a different voltage cannot use this part.

The deciding spec is DDR2 800 at 1.8V on a 240-pin

Before buying, confirm the motherboard supports DDR2 800 (PC2-6400) unbuffered memory at 1.8V with 240-pin slots. If the board calls for a different DDR generation, ECC, registered DIMMs, or another voltage, this module will not fit or function.

Puntos fuertes

  • Boosts system responsiveness with 1GB DDR2 800MHz capacity
  • Speeds up loading times using PC2-6400 rated frequency
  • Handles heavier workloads via 1.8V standard voltage operation
  • Ensures reliable performance through rigorous quality testing
  • Fits compatible desktops with 240-pin DIMM form factor

Especificaciones

BrandA-Tech
SeriesA-Tech DDR2 Desktop Memory RAM
Capacity1GB
SpeedDDR2 800 (PC2 6400)
Tested Frequency800
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

How do I install the 240-pin DDR2 DIMM and which orientation step is most often missed?

Align the notch on the module with the key in the slot, press straight down until both side clips click locked, and verify the clips have fully engaged on each end.

What maintenance or replacement will this 1.8V DDR2 module need over time?

No scheduled maintenance is required; if errors appear, reseat the module or test with a memory diagnostic before considering replacement.

At what speed ceiling does this PC2-6400 CL6 kit hit its limit during sustained workloads?

The module is rated for 800 MHz operation; sustained loads will not exceed that validated frequency.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.