저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

A-Tech

A-Tech 2GB (2x1GB) DDR2 667MHz DIMM PC2-5300 UDIMM Non-ECC 1.8V CL5 240-Pin desktop RAM

SKU CH-HTWB-CBJ91

A 2 GB dual-channel DDR2 kit with two 1 GB DIMMs running at 667 MHz, 1.8 V, CL5 latency and 240-pin unbuffered non-ECC layout

  • Capacity2GB (2 x 1GB)
  • SpeedDDR2 667 (PC2 5300)
  • Tested Frequency667
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 2GB (2 x 1GB)

Speed DDR2 667 (PC2 5300)

  • 2GB dual-channel kit doubles memory bandwidth for smoother multitasking
  • DDR2 667 MHz speed accelerates application loading and system responsiveness
  • 8 V standard voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits a wide range of desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer desktop PCs

Kit Purpose

This A-Tech kit supplies two 1GB DDR2 modules for desktop systems that accept 240-pin unbuffered memory. The dual-channel pair targets owners of older AMD or Intel platforms needing a straightforward capacity increase.

Build And Connections

Each stick uses the standard 1.8V DDR2 voltage and a 240-pin DIMM edge connector that fits legacy desktop slots without adapters. Unbuffered non-ECC layout means the modules install like ordinary consumer RAM and require no special motherboard support.

Deciding Specification

The rated speed is DDR2 667MHz, also labelled PC2-5300, with a tested CAS latency of CL5. If your board specifies this exact frequency and voltage, the kit will operate at its advertised timing; otherwise the system will fall back to a lower supported speed.

주요 특징

  • 2GB dual-channel kit doubles memory bandwidth for smoother multitasking
  • DDR2 667 MHz speed accelerates application loading and system responsiveness
  • 8 V standard voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits a wide range of desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer desktop PCs

사양

BrandA-Tech
SeriesA-Tech DDR2 Desktop Memory RAM
Capacity2GB (2 x 1GB)
SpeedDDR2 667 (PC2 5300)
Tested Frequency667
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What speed does the DDR2 667MHz DIMM run at in practice?

The kit operates at 667 MHz, which is the PC2-5300 standard for DDR2 DIMM memory.

What physical slot does this 240-pin DIMM require?

It fits a standard 240-pin DDR2 DIMM socket on a desktop motherboard.

How do I install the dual-channel kit and what step is often missed?

Insert both 1GB modules into matching-colour slots for dual-channel mode; the step often missed is pressing each module down until the retention clips click on both sides.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.