NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
4GB DDR3L 1600MHz ECC registered DIMM with 2Rx8 organisation, CL11 latency and 1.35V operation
This 4GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V low voltage. It is built as a registered ECC DIMM using a 2Rx8 configuration with major brand chips. The 240-pin form factor fits server and workstation boards that require registered memory. It serves as a direct replacement for Dell part A6994474.
Registered buffering reduces electrical load on the memory controller, allowing stable operation during sustained workloads. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute tasks. The low-voltage DDR3L design limits heat output while maintaining the rated 1600MHz speed over extended periods.
The 240-pin DIMM uses a registered interface that supports higher module counts per channel than unbuffered alternatives. Major brand chips are tested to stringent quality standards for dependable daily operation. Low-voltage 1.35V operation eases power budget constraints in multi-DIMM configurations. Buyers needing unbuffered UDIMMs or higher capacities per module should verify platform requirements before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Operating at 1.35V, this DDR3L RDIMM consumes less power than standard 1.5V DDR3, reducing heat output during 24/7 server workloads.
You need a server or workstation motherboard with a 240-pin DDR3 DIMM slot that supports registered ECC memory and 1.35V DDR3L operation.
Mixing registered ECC with unbuffered non-ECC DIMMs is not supported; all slots must use registered ECC modules of matching voltage and rank configuration.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?