OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
4GB DDR3L 1600MHz ECC registered DIMM with 2Rx8 organisation, CL11 latency and 1.35V operation
This 4GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V low voltage. It is built as a registered ECC DIMM using a 2Rx8 configuration with major brand chips. The 240-pin form factor fits server and workstation boards that require registered memory. It serves as a direct replacement for Dell part A6994474.
Registered buffering reduces electrical load on the memory controller, allowing stable operation during sustained workloads. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute tasks. The low-voltage DDR3L design limits heat output while maintaining the rated 1600MHz speed over extended periods.
The 240-pin DIMM uses a registered interface that supports higher module counts per channel than unbuffered alternatives. Major brand chips are tested to stringent quality standards for dependable daily operation. Low-voltage 1.35V operation eases power budget constraints in multi-DIMM configurations. Buyers needing unbuffered UDIMMs or higher capacities per module should verify platform requirements before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Operating at 1.35V, this DDR3L RDIMM consumes less power than standard 1.5V DDR3, reducing heat output during 24/7 server workloads.
You need a server or workstation motherboard with a 240-pin DDR3 DIMM slot that supports registered ECC memory and 1.35V DDR3L operation.
Mixing registered ECC with unbuffered non-ECC DIMMs is not supported; all slots must use registered ECC modules of matching voltage and rank configuration.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟