NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
64GB DDR4 2400MHz ECC LRDIMM 4Rx4 server memory module with CL17 latency and 1.2V operation
This is a single 64GB DDR4 LRDIMM built for server and workstation platforms that require load-reduced registered memory. The module uses a 288-pin DIMM form factor and operates at the standard DDR4 voltage of 1.2V. It is intended for administrators upgrading compatible Micron-referenced systems.
The module runs at DDR4 2400 with a CAS latency of CL17 and a 4Rx4 rank structure. Load-reduced buffering lowers the electrical load on the memory controller, helping maintain stability when all slots are populated under continuous multi-threaded workloads. ECC protection corrects single-bit errors to preserve data integrity during extended operation.
Verify that your system board and processor support DDR4 LRDIMM modules with a 4Rx4 organisation before ordering. Confirm the maximum supported capacity per slot and the qualified memory list for your specific server model. Mixing LRDIMMs with standard RDIMMs is not supported on most platforms.
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at the standard DDR4 voltage of 1.20V and uses Load Reduced technology to lower electrical load on the memory bus, which helps limit heat output and power draw during sustained server workloads.
This memory requires a server or workstation motherboard with 288-pin DDR4 DIMM slots that support ECC Load Reduced DIMMs at 2400MHz; the board must also accept 4Rx4 modules and provide the 1.20V DDR4 standard voltage.
Load Reduced DIMMs use a different buffering architecture than standard Registered DIMMs, so they cannot be mixed with RDIMMs in the same memory channel; the platform must support LRDIMMs specifically for this module to function.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?