NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
A-Tech
64GB DDR4 2400MHz ECC LRDIMM 4Rx4 server memory module with CL17 latency and 1.2V operation
This is a single 64GB DDR4 LRDIMM built for server and workstation platforms that require load-reduced registered memory. The module uses a 288-pin DIMM form factor and operates at the standard DDR4 voltage of 1.2V. It is intended for administrators upgrading compatible Micron-referenced systems.
The module runs at DDR4 2400 with a CAS latency of CL17 and a 4Rx4 rank structure. Load-reduced buffering lowers the electrical load on the memory controller, helping maintain stability when all slots are populated under continuous multi-threaded workloads. ECC protection corrects single-bit errors to preserve data integrity during extended operation.
Verify that your system board and processor support DDR4 LRDIMM modules with a 4Rx4 organisation before ordering. Confirm the maximum supported capacity per slot and the qualified memory list for your specific server model. Mixing LRDIMMs with standard RDIMMs is not supported on most platforms.
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at the standard DDR4 voltage of 1.20V and uses Load Reduced technology to lower electrical load on the memory bus, which helps limit heat output and power draw during sustained server workloads.
This memory requires a server or workstation motherboard with 288-pin DDR4 DIMM slots that support ECC Load Reduced DIMMs at 2400MHz; the board must also accept 4Rx4 modules and provide the 1.20V DDR4 standard voltage.
Load Reduced DIMMs use a different buffering architecture than standard Registered DIMMs, so they cannot be mixed with RDIMMs in the same memory channel; the platform must support LRDIMMs specifically for this module to function.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?