NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.
A-Tech
64GB DDR4 2400MHz ECC LRDIMM 4Rx4 server memory module with CL17 latency and 1.2V operation
This is a single 64GB DDR4 LRDIMM built for server and workstation platforms that require load-reduced registered memory. The module uses a 288-pin DIMM form factor and operates at the standard DDR4 voltage of 1.2V. It is intended for administrators upgrading compatible Micron-referenced systems.
The module runs at DDR4 2400 with a CAS latency of CL17 and a 4Rx4 rank structure. Load-reduced buffering lowers the electrical load on the memory controller, helping maintain stability when all slots are populated under continuous multi-threaded workloads. ECC protection corrects single-bit errors to preserve data integrity during extended operation.
Verify that your system board and processor support DDR4 LRDIMM modules with a 4Rx4 organisation before ordering. Confirm the maximum supported capacity per slot and the qualified memory list for your specific server model. Mixing LRDIMMs with standard RDIMMs is not supported on most platforms.
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at the standard DDR4 voltage of 1.20V and uses Load Reduced technology to lower electrical load on the memory bus, which helps limit heat output and power draw during sustained server workloads.
This memory requires a server or workstation motherboard with 288-pin DDR4 DIMM slots that support ECC Load Reduced DIMMs at 2400MHz; the board must also accept 4Rx4 modules and provide the 1.20V DDR4 standard voltage.
Load Reduced DIMMs use a different buffering architecture than standard Registered DIMMs, so they cannot be mixed with RDIMMs in the same memory channel; the platform must support LRDIMMs specifically for this module to function.
Także w tym dziale
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Waluta płatności i waluta wyświetlania cen.
Wysyłane z portfela przy kasie
Tylko podgląd — katalog wyceniony jest w dolarach
Brak pasującej waluty.
Wybierz język, w którym wyświetla się strona.
Pierwsza wizyta?
Konto już założone?
Nie ma automatycznego resetowania hasła: ten sklep nie wysyła żadnych e-maili, więc nie ma jednorazowego linku, o który można by poprosić. Adres pozostawiony przy koncie zostanie obsłużony ręcznie.
Zgłoszenie zapisane
Do skrzynki odbiorczej nic nie trafi — ten sklep nie wysyła żadnych e-maili. Zgłoszenia są obsługiwane ręcznie.
Hasło się przypomniało?