Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 240-pin DDR3 RDIMM module with black chips

A-Tech

A-Tech 8GB DDR3 1066MHz ECC RDIMM 4Rx8 Hynix HMT41GV7BMR8C-G7 HMT41GV7AMR8C-G7 Server Memory

SKU CH-0PRC-0SV5R

An 8 GB DDR3 1066 MHz ECC registered DIMM with 4Rx8 organisation, 1.5 V operation and a 240-pin form factor for server upgrades

  • Capacity8GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL3
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1066MHz speed delivers PC3-8500 bandwidth for data throughput
  • ECC registered design detects and corrects errors automatically
  • 4Rx8 organisation with major-brand chips ensures signal stability
  • 5V standard voltage matches DDR3 platform requirements

Server ECC RDIMM replacement module

This 8 GB DDR3 registered DIMM replaces Hynix HMT41GV7BMR8C-G7 and HMT41GV7AMR8C-G7 parts in compatible servers and workstations. It delivers error-correcting code protection and registered signalling for stable operation under sustained loads. The module runs at 1066 MHz with CL3 latency at the standard 1.50 V DDR3 voltage.

Upgrade from non-ECC or lower-capacity DDR3

Swapping unbuffered or non-ECC memory for this registered ECC module adds data-integrity safeguards required by many server platforms. The jump is worthwhile when the system board specifies registered DIMMs and the workload demands the reliability that ECC provides. Systems limited to unbuffered memory cannot use this module.

8 GB capacity for virtualization

The single 8 GB rank handles moderate virtual-machine densities, database buffer pools and multi-threaded application caches. Workloads that exceed the installed memory ceiling will trigger paging and reduce throughput. Buyers needing larger per-slot densities or higher memory bandwidth should verify platform support for larger registered modules.

Helstu kostir

  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1066MHz speed delivers PC3-8500 bandwidth for data throughput
  • ECC registered design detects and corrects errors automatically
  • 4Rx8 organisation with major-brand chips ensures signal stability
  • 5V standard voltage matches DDR3 platform requirements

Tæknilýsing

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMT41GV7BMR8C-G7, HMT41GV7AMR8C-G7
Capacity8GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL3
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesHMT41GV7BMR8C-G7, HMT41GV7AMR8C-G7

Spurningar um þessa vöru

Will this 240-pin DDR3 DIMM fit in my server's memory slots?

Yes, the module uses the standard 240-pin DDR3 DIMM form factor required for registered DDR3 server slots.

What is the correct way to seat this registered ECC module, and what step is often missed?

Align the notch with the slot key, press firmly until both side clips click shut, then verify the system recognises the full 8 GB and ECC function in BIOS.

When should this 8 GB DDR3 1066 MHz module be replaced?

Replace it if memory diagnostics report uncorrectable ECC errors or the system fails to POST with the module installed.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.