暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3 RDIMM module with black chips

A-Tech

A-Tech 8GB DDR3 1066MHz ECC RDIMM 4Rx8 Hynix HMT41GV7BMR8C-G7 HMT41GV7AMR8C-G7 Server Memory

SKU CH-0PRC-0SV5R

An 8 GB DDR3 1066 MHz ECC registered DIMM with 4Rx8 organisation, 1.5 V operation and a 240-pin form factor for server upgrades

  • Capacity8GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL3
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1066MHz speed delivers PC3-8500 bandwidth for data throughput
  • ECC registered design detects and corrects errors automatically
  • 4Rx8 organisation with major-brand chips ensures signal stability
  • 5V standard voltage matches DDR3 platform requirements

Server ECC RDIMM replacement module

This 8 GB DDR3 registered DIMM replaces Hynix HMT41GV7BMR8C-G7 and HMT41GV7AMR8C-G7 parts in compatible servers and workstations. It delivers error-correcting code protection and registered signalling for stable operation under sustained loads. The module runs at 1066 MHz with CL3 latency at the standard 1.50 V DDR3 voltage.

Upgrade from non-ECC or lower-capacity DDR3

Swapping unbuffered or non-ECC memory for this registered ECC module adds data-integrity safeguards required by many server platforms. The jump is worthwhile when the system board specifies registered DIMMs and the workload demands the reliability that ECC provides. Systems limited to unbuffered memory cannot use this module.

8 GB capacity for virtualization

The single 8 GB rank handles moderate virtual-machine densities, database buffer pools and multi-threaded application caches. Workloads that exceed the installed memory ceiling will trigger paging and reduce throughput. Buyers needing larger per-slot densities or higher memory bandwidth should verify platform support for larger registered modules.

特長

  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1066MHz speed delivers PC3-8500 bandwidth for data throughput
  • ECC registered design detects and corrects errors automatically
  • 4Rx8 organisation with major-brand chips ensures signal stability
  • 5V standard voltage matches DDR3 platform requirements

仕様

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMT41GV7BMR8C-G7, HMT41GV7AMR8C-G7
Capacity8GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL3
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesHMT41GV7BMR8C-G7, HMT41GV7AMR8C-G7

この商品に関する質問

Will this 240-pin DDR3 DIMM fit in my server's memory slots?

Yes, the module uses the standard 240-pin DDR3 DIMM form factor required for registered DDR3 server slots.

What is the correct way to seat this registered ECC module, and what step is often missed?

Align the notch with the slot key, press firmly until both side clips click shut, then verify the system recognises the full 8 GB and ECC function in BIOS.

When should this 8 GB DDR3 1066 MHz module be replaced?

Replace it if memory diagnostics report uncorrectable ECC errors or the system fails to POST with the module installed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。