Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3 RDIMM module with black chips

A-Tech

A-Tech 8GB DDR3 1066MHz ECC RDIMM 4Rx8 Hynix HMT41GV7BMR8C-G7 HMT41GV7AMR8C-G7 Server Memory

SKU CH-0PRC-0SV5R

An 8 GB DDR3 1066 MHz ECC registered DIMM with 4Rx8 organisation, 1.5 V operation and a 240-pin form factor for server upgrades

  • Capacity8GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL3
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1066MHz speed delivers PC3-8500 bandwidth for data throughput
  • ECC registered design detects and corrects errors automatically
  • 4Rx8 organisation with major-brand chips ensures signal stability
  • 5V standard voltage matches DDR3 platform requirements

Server ECC RDIMM replacement module

This 8 GB DDR3 registered DIMM replaces Hynix HMT41GV7BMR8C-G7 and HMT41GV7AMR8C-G7 parts in compatible servers and workstations. It delivers error-correcting code protection and registered signalling for stable operation under sustained loads. The module runs at 1066 MHz with CL3 latency at the standard 1.50 V DDR3 voltage.

Upgrade from non-ECC or lower-capacity DDR3

Swapping unbuffered or non-ECC memory for this registered ECC module adds data-integrity safeguards required by many server platforms. The jump is worthwhile when the system board specifies registered DIMMs and the workload demands the reliability that ECC provides. Systems limited to unbuffered memory cannot use this module.

8 GB capacity for virtualization

The single 8 GB rank handles moderate virtual-machine densities, database buffer pools and multi-threaded application caches. Workloads that exceed the installed memory ceiling will trigger paging and reduce throughput. Buyers needing larger per-slot densities or higher memory bandwidth should verify platform support for larger registered modules.

Pluspunten

  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1066MHz speed delivers PC3-8500 bandwidth for data throughput
  • ECC registered design detects and corrects errors automatically
  • 4Rx8 organisation with major-brand chips ensures signal stability
  • 5V standard voltage matches DDR3 platform requirements

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMT41GV7BMR8C-G7, HMT41GV7AMR8C-G7
Capacity8GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL3
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesHMT41GV7BMR8C-G7, HMT41GV7AMR8C-G7

Vragen over dit artikel

Will this 240-pin DDR3 DIMM fit in my server's memory slots?

Yes, the module uses the standard 240-pin DDR3 DIMM form factor required for registered DDR3 server slots.

What is the correct way to seat this registered ECC module, and what step is often missed?

Align the notch with the slot key, press firmly until both side clips click shut, then verify the system recognises the full 8 GB and ECC function in BIOS.

When should this 8 GB DDR3 1066 MHz module be replaced?

Replace it if memory diagnostics report uncorrectable ECC errors or the system fails to POST with the module installed.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.