Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Chrome 90-degree compression fitting for 16mm hard tube with G1/4 thread

Alphacool

Alphacool Eiszapfen 16mm 90° Compression Fitting G1/4 Chrome

SKU CH-H07M-72BFX

A 16 mm 90° rotatable compression fitting with G1/4 thread for acrylic or brass hard tubing in chrome finish

  • TypeFittings
  • High-flow path from precision-machined 90° bend
  • Secure 16 mm tube grip via angled union-nut corners
  • Chrome coating bonded to resist chipping and peeling
  • Rotatable G1/4 thread aligns with 95 % of components
  • Distinctive Eiszapfen profile with Alphacool logo for easy identification

Precision 90° Rotatable Fitting

The Alphacool Eiszapfen 16mm 90° compression fitting joins 16 mm hard tubing to any component with a G1/4 thread. Its rotatable design simplifies routing in tight custom loops while the chrome finish resists chipping. High-flow internals maintain coolant velocity through the bend.

For 16 mm Hard-Tube Builds

This fitting suits builders assembling rigid acrylic or brass loops who need a right-angle turn with rotational alignment. It is not for systems using soft tubing, different outer-diameter hard tubes or threads other than G1/4.

16 mm Hard-Tube Compatibility

The single specification that decides fit is the 16 mm hard-tube interface paired with a G1/4 thread. Only tubing with exactly that outside diameter will seal correctly in the compression nut.

Helstu kostir

  • High-flow path from precision-machined 90° bend
  • Secure 16 mm tube grip via angled union-nut corners
  • Chrome coating bonded to resist chipping and peeling
  • Rotatable G1/4 thread aligns with 95 % of components
  • Distinctive Eiszapfen profile with Alphacool logo for easy identification

Tæknilýsing

TypeFittings

Spurningar um þessa vöru

Should I pick the 16 mm or a different tube size for this 90° fitting?

This fitting is made for 16 mm outer-diameter acrylic or brass hard tubes; choose it only if your loop uses 16 mm tubing.

What does the 90° bend and rotatable thread do inside a real build?

The 90° angle lets you route tubing around tight corners without kinks, and the rotatable G1/4 base lets you clock the outlet to any orientation after tightening.

The fitting uses a G1/4 thread — what does that cap in practice?

G1/4 is the standard thread on 95% of water-cooling components, so it mates with almost any block, radiator, pump or reservoir port.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.