Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Athena Power
An M.2 NVMe PCIe adapter backplane cage with full-height and low-profile brackets supporting 2230/2242/2260/2280 SSDs at Gen3 32 Gbps and Gen4 64 Gbps
The Athena Power SP-M21NVME fits a single M.2 NVMe M-key SSD into a PCIe x4 slot. It ships with both a full-height bracket and a low-profile bracket for different chassis. The metal tray holds drives from 2230 up to 2280 length and uses anti-vibration springs for stability. No external cables or AC adapter are required.
The enclosure relies on the metal cage and system airflow to dissipate heat without a fan. Power comes directly from the PCIe slot, so there is no separate power connector. The adapter works with PCIe 3.0 and 4.0 x4 NVMe SSDs, drawing only the power the drive itself needs. Silent operation is guaranteed because no moving parts are present.
Under continuous load the card maintains up to 32 Gbps on PCIe 3.0 and 64 Gbps on PCIe 4.0, limited by the installed SSD. The passive design has no thermal throttling mechanism beyond the metal tray, so very high-end drives may throttle in tight cases. Builders who need active cooling or multiple drive bays should look elsewhere.
| Brand | Athena Power |
|---|---|
| Series | M2U2 Series |
| Model | M.2 SSD Adapter |
| Part Number | SP-M21NVME |
| Color | Black / Silver |
| Size | M.2 |
| Type | Enclosure |
| AC Adapter | No |
| Material | Metal |
| Internal Interface | M.2 NVME M-Key |
| External Interface | No |
| HDD Count Supported | Single NVMe SSD |
| Maximum Capacity (per Bay) | 1 |
| Fan | No |
| Dimensions | 6x5x1167.3mm x 120.8mm x 19mm [Full height bracket]/167.3mm x 84mm x 19mm [Low profile bracket |
| Weight | 141.8 g |
Insert the M.2 NVMe M-key SSD (2230, 2242, 2260 or 2280) into the tray, secure it with the screw, attach the chosen full-height (120.8 mm) or low-profile (84 mm) bracket to the backplane cage, then plug the x4 card into a PCIe 3.0/4.0 x4 slot. The step people miss is swapping the bracket before mounting the card.
The adapter has no fan or moving parts, so it requires no routine maintenance. Only the installed M.2 NVMe SSD may need replacement if it reaches its write endurance limit. The anti-vibration springs and metal cage are fixed and not serviceable.
The electrical ceiling is the PCIe 3.0 x4 limit of 32 Gbps or PCIe 4.0 x4 limit of 64 Gbps, whichever your platform supports. Because there is no active cooling, the SSD itself will throttle before the adapter reaches any other bottleneck.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?