Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

Baibo

Baibo SDGR-2000ET 2000W ATX power supply 180-260V 8 GPU support

SKU CH-4PCJ-N92RG MPN SDGR-2000ET

Delivers 2000W at 12V for up to eight graphics cards with 80 Plus Platinum efficiency and dual ball-bearing cooling

  • TypeAT
  • Delivers up to 2000W for eight GPU mining rigs
  • 80 Plus Gold certified at 95% efficiency reduces energy waste
  • Active PFC and 12V 8-pin connectors ensure stable power delivery
  • 140mm dual ball-bearing fan provides high airflow with low noise
  • Supports AC input from 180V to 260V for flexible deployment

2000 W mining power supply

The Baibo SDGR-2000ET is a 2000 W ATX unit built for high-density mining rigs. It accepts an AC input range of 180 V to 240 V and provides up to eight 12 V graphics-card connectors. The power supply is intended for operators running multiple GPUs on a single source.

80 Plus Gold efficiency

The unit carries 80 Plus Gold certification and delivers up to 95 % efficiency under typical loads. A 140 mm dual ball-bearing fan moves air across the heatsinks while keeping acoustic output low. Passive power-factor correction helps stabilise the input current.

20 + 4 pin main connector with dual CPU power leads

The main motherboard connection uses a 20 + 4 pin interface and the board receives two 8 pin plus one 4 pin CPU power cables. Three SATA ports are available for storage or risers. Full copper output wiring supports the high current demanded by eight graphics cards.

Helstu kostir

  • Delivers up to 2000W for eight GPU mining rigs
  • 80 Plus Gold certified at 95% efficiency reduces energy waste
  • Active PFC and 12V 8-pin connectors ensure stable power delivery
  • 140mm dual ball-bearing fan provides high airflow with low noise
  • Supports AC input from 180V to 260V for flexible deployment

Tæknilýsing

TypeAT

Spurningar um þessa vöru

How do I install the Baibo SDGR-2000ET and which step is often missed?

Connect the 20 + 4Pin main power, both 8 pin CPU connectors, the 4 pin CPU connector, and the eight 8 pin graphics card connectors. The step often missed is verifying your mains supply stays within 180-260V before powering on.

What maintenance or replacement will the Baibo SDGR-2000ET need later?

The 140mm dual ball bearing fan is the primary wear item; expect to replace it after extended high-load mining. The three SATA ports and all 12V output wiring are solid copper and rarely need service.

What limit appears first on the Baibo SDGR-2000ET under sustained 2000W mining loads?

The 180-260V input window is the first constraint; if mains voltage sags below 180V the unit will shut down. Passive PFC and 90% efficiency at 12V output mean thermal headroom remains, but voltage stability is critical.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.