Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Rectangular ATX power supply unit in matte black metal casing with 140mm dual ball bearing fan grille visible on one side

Baibo

Baibo SDGR-2000ET 2000W ATX power supply 180-260V 8 GPU support

SKU CH-4PCJ-N92RG MPN SDGR-2000ET

Delivers 2000W at 12V for up to eight graphics cards with 80 Plus Platinum efficiency and dual ball-bearing cooling

  • TypeAT
  • Delivers up to 2000W for eight GPU mining rigs
  • 80 Plus Gold certified at 95% efficiency reduces energy waste
  • Active PFC and 12V 8-pin connectors ensure stable power delivery
  • 140mm dual ball-bearing fan provides high airflow with low noise
  • Supports AC input from 180V to 260V for flexible deployment

2000 W mining power supply

The Baibo SDGR-2000ET is a 2000 W ATX unit built for high-density mining rigs. It accepts an AC input range of 180 V to 240 V and provides up to eight 12 V graphics-card connectors. The power supply is intended for operators running multiple GPUs on a single source.

80 Plus Gold efficiency

The unit carries 80 Plus Gold certification and delivers up to 95 % efficiency under typical loads. A 140 mm dual ball-bearing fan moves air across the heatsinks while keeping acoustic output low. Passive power-factor correction helps stabilise the input current.

20 + 4 pin main connector with dual CPU power leads

The main motherboard connection uses a 20 + 4 pin interface and the board receives two 8 pin plus one 4 pin CPU power cables. Three SATA ports are available for storage or risers. Full copper output wiring supports the high current demanded by eight graphics cards.

Najważniejsze cechy

  • Delivers up to 2000W for eight GPU mining rigs
  • 80 Plus Gold certified at 95% efficiency reduces energy waste
  • Active PFC and 12V 8-pin connectors ensure stable power delivery
  • 140mm dual ball-bearing fan provides high airflow with low noise
  • Supports AC input from 180V to 260V for flexible deployment

Specyfikacja

TypeAT

Pytania dotyczące tego produktu

How do I install the Baibo SDGR-2000ET and which step is often missed?

Connect the 20 + 4Pin main power, both 8 pin CPU connectors, the 4 pin CPU connector, and the eight 8 pin graphics card connectors. The step often missed is verifying your mains supply stays within 180-260V before powering on.

What maintenance or replacement will the Baibo SDGR-2000ET need later?

The 140mm dual ball bearing fan is the primary wear item; expect to replace it after extended high-load mining. The three SATA ports and all 12V output wiring are solid copper and rarely need service.

What limit appears first on the Baibo SDGR-2000ET under sustained 2000W mining loads?

The 180-260V input window is the first constraint; if mains voltage sags below 180V the unit will shut down. Passive PFC and 90% efficiency at 12V output mean thermal headroom remains, but voltage stability is critical.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.