Baibo
Baibo SDGR-2000ET 2000W ATX power supply 180-260V 8 GPU support
Delivers 2000W at 12V for up to eight graphics cards with 80 Plus Platinum efficiency and dual ball-bearing cooling
- TypeAT
- Delivers up to 2000W for eight GPU mining rigs
- 80 Plus Gold certified at 95% efficiency reduces energy waste
- Active PFC and 12V 8-pin connectors ensure stable power delivery
- 140mm dual ball-bearing fan provides high airflow with low noise
- Supports AC input from 180V to 260V for flexible deployment
2000 W mining power supply
The Baibo SDGR-2000ET is a 2000 W ATX unit built for high-density mining rigs. It accepts an AC input range of 180 V to 240 V and provides up to eight 12 V graphics-card connectors. The power supply is intended for operators running multiple GPUs on a single source.
80 Plus Gold efficiency
The unit carries 80 Plus Gold certification and delivers up to 95 % efficiency under typical loads. A 140 mm dual ball-bearing fan moves air across the heatsinks while keeping acoustic output low. Passive power-factor correction helps stabilise the input current.
20 + 4 pin main connector with dual CPU power leads
The main motherboard connection uses a 20 + 4 pin interface and the board receives two 8 pin plus one 4 pin CPU power cables. Three SATA ports are available for storage or risers. Full copper output wiring supports the high current demanded by eight graphics cards.
Points forts
- Delivers up to 2000W for eight GPU mining rigs
- 80 Plus Gold certified at 95% efficiency reduces energy waste
- Active PFC and 12V 8-pin connectors ensure stable power delivery
- 140mm dual ball-bearing fan provides high airflow with low noise
- Supports AC input from 180V to 260V for flexible deployment
Caractéristiques
| Type | AT |
|---|
Questions sur cet article
How do I install the Baibo SDGR-2000ET and which step is often missed?
Connect the 20 + 4Pin main power, both 8 pin CPU connectors, the 4 pin CPU connector, and the eight 8 pin graphics card connectors. The step often missed is verifying your mains supply stays within 180-260V before powering on.
What maintenance or replacement will the Baibo SDGR-2000ET need later?
The 140mm dual ball bearing fan is the primary wear item; expect to replace it after extended high-load mining. The three SATA ports and all 12V output wiring are solid copper and rarely need service.
What limit appears first on the Baibo SDGR-2000ET under sustained 2000W mining loads?
The 180-260V input window is the first constraint; if mains voltage sags below 180V the unit will shut down. Passive PFC and 90% efficiency at 12V output mean thermal headroom remains, but voltage stability is critical.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



