Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
White PLA filament on 8.00 inch spool, neatly wound 1.75mm thread

BFKK

BFKK PLA Filament 1.75mm White 1kg Spool Dimensional Accuracy +/- 0.02 mm

SKU CH-7FZ6-08KM6

White PLA filament on a 1 kg spool with ±0.02 mm accuracy for reliable FDM printing

  • ColorWhite

Color White

  • Consistent prints with dimensional accuracy of +/- 0.02 mm
  • Tangle-free feeding from 100% neatly wound spool
  • Broad printer fit with 1.75 mm diameter and 2.20 mm hub hole
  • Reliable results at 200-230 °C nozzle and 50-65 °C bed
  • Ready for lithophane and detailed models in clean white PLA

PLA Filament 1.75mm White 1kg Spool

This PLA filament comes on a 1 kg spool with a 1.75 mm diameter and a dimensional accuracy of +/- 0.02 mm. It is suited for hobbyists, educators and makers who use FDM 3D printers and want reliable material for everyday models, prototypes or lithophane prints.

Neat Winding Reduces Tangles and Jams

The spool is wound with a self-developed device that achieves a 100 % neat rate, so the filament feeds smoothly without knots. Most issues arise when the spool hub hole (2.20 in) does not match the printer holder or when the spool width (2.50 in) exceeds the available space, causing friction or misalignment during printing.

Check Spool Dimensions and Temperature Range

Verify that your printer accepts a spool with an 8.00 in diameter, 2.50 in width and a 2.20 in hub hole before ordering. The manufacturer recommends a nozzle temperature of 200-230 °C, a bed temperature of 50-65 °C and a print speed of 50-100 mm/s for best results.

Helstu kostir

  • Consistent prints with dimensional accuracy of +/- 0.02 mm
  • Tangle-free feeding from 100% neatly wound spool
  • Broad printer fit with 1.75 mm diameter and 2.20 mm hub hole
  • Reliable results at 200-230 °C nozzle and 50-65 °C bed
  • Ready for lithophane and detailed models in clean white PLA

Tæknilýsing

ColorWhite

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How can I confirm the filament is feeding correctly after loading it?

The 100% neat winding rate and ± .02 mm diameter tolerance mean the filament should unwind smoothly without tangles or jams during the first layers.

What comes with the spool and what must I supply?

The box contains a 1 kg spool of 1.75 mm white PLA on an 8.00" diameter spool with a 2.20" hub hole; you must provide a compatible FDM printer and any bed-adhesion aids you prefer.

Which spool size should I choose for a printer with a standard filament holder?

The 1 kg spool measuring 8.00" in diameter and 2.50" wide fits most FDM printers that accept 1.75 mm filament on a 2.20" hub.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.