暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
White PLA filament on 8.00 inch spool, neatly wound 1.75mm thread

BFKK

BFKK PLA Filament 1.75mm White 1kg Spool Dimensional Accuracy +/- 0.02 mm

SKU CH-7FZ6-08KM6

White PLA filament on a 1 kg spool with ±0.02 mm accuracy for reliable FDM printing

  • ColorWhite

Color White

  • Consistent prints with dimensional accuracy of +/- 0.02 mm
  • Tangle-free feeding from 100% neatly wound spool
  • Broad printer fit with 1.75 mm diameter and 2.20 mm hub hole
  • Reliable results at 200-230 °C nozzle and 50-65 °C bed
  • Ready for lithophane and detailed models in clean white PLA

PLA Filament 1.75mm White 1kg Spool

This PLA filament comes on a 1 kg spool with a 1.75 mm diameter and a dimensional accuracy of +/- 0.02 mm. It is suited for hobbyists, educators and makers who use FDM 3D printers and want reliable material for everyday models, prototypes or lithophane prints.

Neat Winding Reduces Tangles and Jams

The spool is wound with a self-developed device that achieves a 100 % neat rate, so the filament feeds smoothly without knots. Most issues arise when the spool hub hole (2.20 in) does not match the printer holder or when the spool width (2.50 in) exceeds the available space, causing friction or misalignment during printing.

Check Spool Dimensions and Temperature Range

Verify that your printer accepts a spool with an 8.00 in diameter, 2.50 in width and a 2.20 in hub hole before ordering. The manufacturer recommends a nozzle temperature of 200-230 °C, a bed temperature of 50-65 °C and a print speed of 50-100 mm/s for best results.

特長

  • Consistent prints with dimensional accuracy of +/- 0.02 mm
  • Tangle-free feeding from 100% neatly wound spool
  • Broad printer fit with 1.75 mm diameter and 2.20 mm hub hole
  • Reliable results at 200-230 °C nozzle and 50-65 °C bed
  • Ready for lithophane and detailed models in clean white PLA

仕様

ColorWhite

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How can I confirm the filament is feeding correctly after loading it?

The 100% neat winding rate and ± .02 mm diameter tolerance mean the filament should unwind smoothly without tangles or jams during the first layers.

What comes with the spool and what must I supply?

The box contains a 1 kg spool of 1.75 mm white PLA on an 8.00" diameter spool with a 2.20" hub hole; you must provide a compatible FDM printer and any bed-adhesion aids you prefer.

Which spool size should I choose for a printer with a standard filament holder?

The 1 kg spool measuring 8.00" in diameter and 2.50" wide fits most FDM printers that accept 1.75 mm filament on a 2.20" hub.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。