暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black PLA filament spool 1.75 mm neatly wound on plastic reel

BFKK

BFKK PLA Filament 1.75 mm Black 1 kg +/- .02 mm

SKU CH-GG73-K06RE

1.75 mm black PLA filament on a 1 kg spool with ±0.02 mm accuracy for reliable FDM printing

  • ColorBlack

Color Black

  • Consistent prints with dimensional accuracy of +/- .02 mm
  • Tangle-free unwinding from 100 % neatly wound spool
  • Broad printer fit with 1.75 mm diameter and 2.20 mm hub hole
  • Reliable PLA material prints without clogs or bubbles
  • Optimised settings at 200-230 °C nozzle and 50-65 °C bed

PLA Filament for FDM 3D Printers

This 1.75 mm PLA filament comes on a 1 kg spool with a dimensional accuracy of +/- 0.02 mm. It is designed to fit most FDM 3D printers and suits both beginners and experienced users looking for reliable material.

Consistent extrusion during long prints

The self-developed neat winding device delivers a 100 % neat rate that prevents tangles and reduces the risk of jams during extended printing sessions. Stable diameter control maintains steady flow so layer adhesion stays uniform from the first layer to the last.

Simple spool mounting and setup

The spool measures 8.00" in diameter, 2.50" wide, with a 2.20" hub hole that fits many printer holders. Recommended settings are a nozzle temperature of 200-230°C, bed temperature of 50-65°C, and print speed of 50-100 mm/s for reliable results.

特長

  • Consistent prints with dimensional accuracy of +/- .02 mm
  • Tangle-free unwinding from 100 % neatly wound spool
  • Broad printer fit with 1.75 mm diameter and 2.20 mm hub hole
  • Reliable PLA material prints without clogs or bubbles
  • Optimised settings at 200-230 °C nozzle and 50-65 °C bed

仕様

ColorBlack

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much heat does the 1.75 mm PLA filament generate during long prints?

The filament itself produces no heat; your printer's nozzle runs at 200-230 °C and the bed at 50-65 °C, so ensure adequate ventilation around the machine.

What printer hardware is required to use this 1 kg spool?

Any FDM 3D printer that accepts 1.75 mm filament and can accommodate an 8.00" diameter spool with a 2.20" hub hole will work.

Will the +/- 0.02 mm tolerance work reliably with an older extruder?

Yes, the tight diameter accuracy reduces clog risk and feeds smoothly through most legacy 1.75 mm extruders.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。