Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black PLA filament spool 1.75 mm neatly wound on plastic reel

BFKK

BFKK PLA Filament 1.75 mm Black 1 kg +/- .02 mm

SKU CH-GG73-K06RE

1.75 mm black PLA filament on a 1 kg spool with ±0.02 mm accuracy for reliable FDM printing

  • ColorBlack

Color Black

  • Consistent prints with dimensional accuracy of +/- .02 mm
  • Tangle-free unwinding from 100 % neatly wound spool
  • Broad printer fit with 1.75 mm diameter and 2.20 mm hub hole
  • Reliable PLA material prints without clogs or bubbles
  • Optimised settings at 200-230 °C nozzle and 50-65 °C bed

PLA Filament for FDM 3D Printers

This 1.75 mm PLA filament comes on a 1 kg spool with a dimensional accuracy of +/- 0.02 mm. It is designed to fit most FDM 3D printers and suits both beginners and experienced users looking for reliable material.

Consistent extrusion during long prints

The self-developed neat winding device delivers a 100 % neat rate that prevents tangles and reduces the risk of jams during extended printing sessions. Stable diameter control maintains steady flow so layer adhesion stays uniform from the first layer to the last.

Simple spool mounting and setup

The spool measures 8.00" in diameter, 2.50" wide, with a 2.20" hub hole that fits many printer holders. Recommended settings are a nozzle temperature of 200-230°C, bed temperature of 50-65°C, and print speed of 50-100 mm/s for reliable results.

Priekšrocības

  • Consistent prints with dimensional accuracy of +/- .02 mm
  • Tangle-free unwinding from 100 % neatly wound spool
  • Broad printer fit with 1.75 mm diameter and 2.20 mm hub hole
  • Reliable PLA material prints without clogs or bubbles
  • Optimised settings at 200-230 °C nozzle and 50-65 °C bed

Specifikācijas

ColorBlack

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How much heat does the 1.75 mm PLA filament generate during long prints?

The filament itself produces no heat; your printer's nozzle runs at 200-230 °C and the bed at 50-65 °C, so ensure adequate ventilation around the machine.

What printer hardware is required to use this 1 kg spool?

Any FDM 3D printer that accepts 1.75 mm filament and can accommodate an 8.00" diameter spool with a 2.20" hub hole will work.

Will the +/- 0.02 mm tolerance work reliably with an older extruder?

Yes, the tight diameter accuracy reduces clog risk and feeds smoothly through most legacy 1.75 mm extruders.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.