Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black PLA filament spool 1.75 mm neatly wound on plastic reel

BFKK

BFKK PLA Filament 1.75 mm Black 1 kg +/- .02 mm

SKU CH-GG73-K06RE

1.75 mm black PLA filament on a 1 kg spool with ±0.02 mm accuracy for reliable FDM printing

  • ColorBlack

Color Black

  • Consistent prints with dimensional accuracy of +/- .02 mm
  • Tangle-free unwinding from 100 % neatly wound spool
  • Broad printer fit with 1.75 mm diameter and 2.20 mm hub hole
  • Reliable PLA material prints without clogs or bubbles
  • Optimised settings at 200-230 °C nozzle and 50-65 °C bed

PLA Filament for FDM 3D Printers

This 1.75 mm PLA filament comes on a 1 kg spool with a dimensional accuracy of +/- 0.02 mm. It is designed to fit most FDM 3D printers and suits both beginners and experienced users looking for reliable material.

Consistent extrusion during long prints

The self-developed neat winding device delivers a 100 % neat rate that prevents tangles and reduces the risk of jams during extended printing sessions. Stable diameter control maintains steady flow so layer adhesion stays uniform from the first layer to the last.

Simple spool mounting and setup

The spool measures 8.00" in diameter, 2.50" wide, with a 2.20" hub hole that fits many printer holders. Recommended settings are a nozzle temperature of 200-230°C, bed temperature of 50-65°C, and print speed of 50-100 mm/s for reliable results.

Helstu kostir

  • Consistent prints with dimensional accuracy of +/- .02 mm
  • Tangle-free unwinding from 100 % neatly wound spool
  • Broad printer fit with 1.75 mm diameter and 2.20 mm hub hole
  • Reliable PLA material prints without clogs or bubbles
  • Optimised settings at 200-230 °C nozzle and 50-65 °C bed

Tæknilýsing

ColorBlack

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much heat does the 1.75 mm PLA filament generate during long prints?

The filament itself produces no heat; your printer's nozzle runs at 200-230 °C and the bed at 50-65 °C, so ensure adequate ventilation around the machine.

What printer hardware is required to use this 1 kg spool?

Any FDM 3D printer that accepts 1.75 mm filament and can accommodate an 8.00" diameter spool with a 2.20" hub hole will work.

Will the +/- 0.02 mm tolerance work reliably with an older extruder?

Yes, the tight diameter accuracy reduces clog risk and feeds smoothly through most legacy 1.75 mm extruders.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.