Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two black USB-A male plugs with green 5-pin screw terminal blocks, 5 by 2.1 by 1.2 cm

BUCIER

BUCIER USB 2.0 A Male to 5-Pin Screw Terminal Adapter 2-Pack

SKU CH-883H-H5TZB

Connects USB 2.0 devices to screw terminals for charging and data transfer without soldering

  • Typeusb 2.0
  • ColorMale
  • Changer Typeusb 2.0
  • Connector Ausb 2.0
  • Connector Busb 2.0
  • FeaturesElectronic devices with USB 2.0 A ports
  • Solder-free wiring with bolt-screw terminals
  • 5-pin shielded connector supports charging and data transfer
  • Compact 5 cm × 2.1 cm × 1.2 cm adapter fits tight spaces
  • Accepts AWG 28-16 wire for flexible cable builds
  • Two adapters included for multiple connection points

Two-pack USB 2.0 screw-terminal adapter

This two-pack provides a USB 2.0 Type-A male plug on one end and a five-pin screw-terminal block on the other. Each unit measures 5 cm by 2.1 cm by 1.2 cm and follows the USB 2.0 wiring standard with shield, power, data-minus, data-plus and ground pins. The solderless design lets installers terminate wires using only a screwdriver and wire stripper.

Makers extending USB cables without soldering

The adapter suits hobbyists and technicians who need to lengthen or repair USB 2.0 cables in custom enclosures, test fixtures or prototype boards. Users requiring a sealed industrial connector, a right-angle form factor or support for USB 3.0 and higher speeds should look at other solutions.

Solderless termination speeds up wiring

The pluggable screw terminals accept AWG 28-16 solid or stranded wire and remove the need for a soldering iron. This reduces assembly time and allows quick rewiring during development or field service. No software or drivers are included because the device is a passive wiring adapter.

Helstu kostir

  • Solder-free wiring with bolt-screw terminals
  • 5-pin shielded connector supports charging and data transfer
  • Compact 5 cm × 2.1 cm × 1.2 cm adapter fits tight spaces
  • Accepts AWG 28-16 wire for flexible cable builds
  • Two adapters included for multiple connection points

Tæknilýsing

BrandAAOTOKK
ModelAAOTOKK-[UnknownModelNumber]
Part NumberA-00003
Typeusb 2.0
ColorMale
Changer Typeusb 2.0
Connector Ausb 2.0
Connector Busb 2.0
FeaturesElectronic devices with USB 2.0 A ports
Package Quantity1

Spurningar um þessa vöru

What USB port must my device have to plug this adapter in?

It requires a standard USB 2.0 Type-A male port on the host device.

Will this work with my existing USB 2.0 cables and peripherals?

Yes, it follows the USB 2.0 wiring standard so it can extend existing cables for charging or data.

How can I verify the connections are correct after wiring the screw terminals?

Check that the shield, positive, D-, D+ and ground wires match the labelled terminals before applying power.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.