暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two black USB-A male plugs with green 5-pin screw terminal blocks, 5 by 2.1 by 1.2 cm

BUCIER

BUCIER USB 2.0 A Male to 5-Pin Screw Terminal Adapter 2-Pack

SKU CH-883H-H5TZB

Connects USB 2.0 devices to screw terminals for charging and data transfer without soldering

  • Typeusb 2.0
  • ColorMale
  • Changer Typeusb 2.0
  • Connector Ausb 2.0
  • Connector Busb 2.0
  • FeaturesElectronic devices with USB 2.0 A ports
  • Solder-free wiring with bolt-screw terminals
  • 5-pin shielded connector supports charging and data transfer
  • Compact 5 cm × 2.1 cm × 1.2 cm adapter fits tight spaces
  • Accepts AWG 28-16 wire for flexible cable builds
  • Two adapters included for multiple connection points

Two-pack USB 2.0 screw-terminal adapter

This two-pack provides a USB 2.0 Type-A male plug on one end and a five-pin screw-terminal block on the other. Each unit measures 5 cm by 2.1 cm by 1.2 cm and follows the USB 2.0 wiring standard with shield, power, data-minus, data-plus and ground pins. The solderless design lets installers terminate wires using only a screwdriver and wire stripper.

Makers extending USB cables without soldering

The adapter suits hobbyists and technicians who need to lengthen or repair USB 2.0 cables in custom enclosures, test fixtures or prototype boards. Users requiring a sealed industrial connector, a right-angle form factor or support for USB 3.0 and higher speeds should look at other solutions.

Solderless termination speeds up wiring

The pluggable screw terminals accept AWG 28-16 solid or stranded wire and remove the need for a soldering iron. This reduces assembly time and allows quick rewiring during development or field service. No software or drivers are included because the device is a passive wiring adapter.

特長

  • Solder-free wiring with bolt-screw terminals
  • 5-pin shielded connector supports charging and data transfer
  • Compact 5 cm × 2.1 cm × 1.2 cm adapter fits tight spaces
  • Accepts AWG 28-16 wire for flexible cable builds
  • Two adapters included for multiple connection points

仕様

BrandAAOTOKK
ModelAAOTOKK-[UnknownModelNumber]
Part NumberA-00003
Typeusb 2.0
ColorMale
Changer Typeusb 2.0
Connector Ausb 2.0
Connector Busb 2.0
FeaturesElectronic devices with USB 2.0 A ports
Package Quantity1

この商品に関する質問

What USB port must my device have to plug this adapter in?

It requires a standard USB 2.0 Type-A male port on the host device.

Will this work with my existing USB 2.0 cables and peripherals?

Yes, it follows the USB 2.0 wiring standard so it can extend existing cables for charging or data.

How can I verify the connections are correct after wiring the screw terminals?

Check that the shield, positive, D-, D+ and ground wires match the labelled terminals before applying power.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。