Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

DELL

DELL 400-AHNE 1.2TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-CRM9-A6TGV

A 1.2TB 2.5" SAS hard drive spinning at 10000 RPM with a 12Gb/s interface for hot-swap server bays

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • 2 TB capacity for data-intensive workloads
  • 10 000 RPM spindle speed for fast access
  • SAS 12 Gb/s interface for high throughput
  • 5 inch form factor fits dense server bays
  • Hot-swap tray enables drive changes without downtime

Dell 400-AHNE 1.2TB SAS Drive

The Dell 400-AHNE is a 1.2TB 2.5-inch internal hard drive with a SAS 12Gb/s interface spinning at 10000 RPM. It is supplied as a bare drive with hot-swap capability for direct integration into compatible bays. This enterprise-class HDD targets servers and storage arrays needing high-throughput rotational storage.

Enterprise SAS Storage Upgrade

This drive suits administrators expanding Dell PowerEdge or compatible SAS backplanes that accept 2.5-inch 10K spindles. Buyers whose controllers lack 12Gb/s SAS ports or who require solid-state latency should look elsewhere. Systems limited to 3.5-inch bays without adapters cannot use this form factor.

12Gb/s SAS Interface Decides Fit

The single specification that decides compatibility is the 12Gb/s SAS interface paired with the 2.5-inch hot-swap form factor. A backplane or HBA must support this exact signalling rate and physical connector. Without that match the drive will not function regardless of capacity or spindle speed.

Helstu kostir

  • 2 TB capacity for data-intensive workloads
  • 10 000 RPM spindle speed for fast access
  • SAS 12 Gb/s interface for high throughput
  • 5 inch form factor fits dense server bays
  • Hot-swap tray enables drive changes without downtime

Tæknilýsing

BrandDell
Model400-AHNE
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.2TB
RPM10000 RPM
Average Latency12Gb/s
Form Factor2.5"

Spurningar um þessa vöru

Does the 400-AHNE arrive with a tray or cables, or must I supply them?

The unit is listed as a bare drive with hot-swap tray type, so a compatible 2.5" SAS tray and cables are required separately.

Is the 1.2TB 10K 12Gb/s SAS model the only capacity offered for this part number?

The 400-AHNE is specified at 1.2TB capacity; other capacities would carry different Dell part numbers.

What sustained throughput can I expect from the 12Gb/s SAS interface inside a server backplane?

The 12Gb/s SAS link supports up to 12Gb/s transfer rate; actual sustained throughput depends on the 10000 RPM mechanics and the host controller.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.