Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 2.5 inch SAS hard drive with hot-swap tray

DELL

DELL 400-AHNE 1.2TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-CRM9-A6TGV

A 1.2TB 2.5" SAS hard drive spinning at 10000 RPM with a 12Gb/s interface for hot-swap server bays

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • 2 TB capacity for data-intensive workloads
  • 10 000 RPM spindle speed for fast access
  • SAS 12 Gb/s interface for high throughput
  • 5 inch form factor fits dense server bays
  • Hot-swap tray enables drive changes without downtime

Dell 400-AHNE 1.2TB SAS Drive

The Dell 400-AHNE is a 1.2TB 2.5-inch internal hard drive with a SAS 12Gb/s interface spinning at 10000 RPM. It is supplied as a bare drive with hot-swap capability for direct integration into compatible bays. This enterprise-class HDD targets servers and storage arrays needing high-throughput rotational storage.

Enterprise SAS Storage Upgrade

This drive suits administrators expanding Dell PowerEdge or compatible SAS backplanes that accept 2.5-inch 10K spindles. Buyers whose controllers lack 12Gb/s SAS ports or who require solid-state latency should look elsewhere. Systems limited to 3.5-inch bays without adapters cannot use this form factor.

12Gb/s SAS Interface Decides Fit

The single specification that decides compatibility is the 12Gb/s SAS interface paired with the 2.5-inch hot-swap form factor. A backplane or HBA must support this exact signalling rate and physical connector. Without that match the drive will not function regardless of capacity or spindle speed.

Puncte forte

  • 2 TB capacity for data-intensive workloads
  • 10 000 RPM spindle speed for fast access
  • SAS 12 Gb/s interface for high throughput
  • 5 inch form factor fits dense server bays
  • Hot-swap tray enables drive changes without downtime

Specificații

BrandDell
Model400-AHNE
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.2TB
RPM10000 RPM
Average Latency12Gb/s
Form Factor2.5"

Întrebări despre acest articol

Does the 400-AHNE arrive with a tray or cables, or must I supply them?

The unit is listed as a bare drive with hot-swap tray type, so a compatible 2.5" SAS tray and cables are required separately.

Is the 1.2TB 10K 12Gb/s SAS model the only capacity offered for this part number?

The 400-AHNE is specified at 1.2TB capacity; other capacities would carry different Dell part numbers.

What sustained throughput can I expect from the 12Gb/s SAS interface inside a server backplane?

The 12Gb/s SAS link supports up to 12Gb/s transfer rate; actual sustained throughput depends on the 10000 RPM mechanics and the host controller.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.