Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Dell PowerEdge R730 2U rack server, matte black front with eight 3.5-inch drive bays

DELL

DELL PowerEdge R730 8x3.5" 1x Xeon E5-2640 v3 2.6GHz 256GB DDR4 No Drive Rack Server

SKU CH-VMMT-G6RD9

2U rack server with eight 3.5-inch drive bays, one Xeon E5-2640 v3 at 2.6GHz, 256GB DDR4 ECC, PERC H730 controller and iDRAC8 Enterprise

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.6GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size256GB
  • Ready for virtualisation with 256GB DDR4 memory
  • Scales to dual processors with second Xeon socket
  • Enterprise RAID performance via PERC H730 controller
  • High-speed networking with dual 10GbE and dual 1GbE ports
  • Remote management through iDRAC8 Enterprise licence

8-bay 3.5-inch rack server with Xeon E5-2640 v3

This Dell PowerEdge R730 is a 2U rack-mount server fitted with one Intel Xeon E5-2640 v3 processor at 2.6 GHz and 256 GB of DDR4 ECC registered memory. It provides eight 3.5-inch drive bays served by a PERC H730 SAS controller and includes dual 495 W power supplies plus iDRAC8 Enterprise remote management. The unit ships without drives so storage can be added to order.

Suits single-socket workloads needing large

The single-socket configuration and eight large-form-factor bays make it a fit for archive storage, backup targets or virtualisation hosts that prioritise capacity over maximum compute density. Buyers who need both processor sockets populated, 2.5-inch bay density or a GPU-ready chassis should evaluate other platforms.

PERC H730 SAS controller with eight 3.5-inch bays

The installed PERC H730 RAID controller manages up to eight 3.5-inch SATA or SAS drives, defining the storage topology this server can support. Confirm that your drive count, RAID level and throughput requirements match this controller before purchasing.

Helstu kostir

  • Ready for virtualisation with 256GB DDR4 memory
  • Scales to dual processors with second Xeon socket
  • Enterprise RAID performance via PERC H730 controller
  • High-speed networking with dual 10GbE and dual 1GbE ports
  • Remote management through iDRAC8 Enterprise licence

Tæknilýsing

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.6GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)16,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Spurningar um þessa vöru

What rack depth is needed for the 36-inch Dell PowerEdge R730 chassis?

The server measures 36 inches deep, so a rack with at least 36 inches of usable depth is required for the 8-bay 3.5-inch chassis.

How is the PERC H730 RAID controller connected to the backplane during installation?

The H730 plugs into the dedicated internal PCIe slot and two mini-SAS cables link it to the 8-drive 3.5-inch backplane; the step often missed is seating both cables fully before powering on.

When will the 495-watt redundant power supplies need replacement?

The dual 495W units are hot-swap rated; replace a module when iDRAC8 reports a fault or the amber LED lights, typically after several years of continuous operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.