DELL
DELL PowerEdge R730 8x3.5" 1x Xeon E5-2640 v3 2.6GHz 256GB DDR4 No Drive Rack Server
2U rack server with eight 3.5-inch drive bays, one Xeon E5-2640 v3 at 2.6GHz, 256GB DDR4 ECC, PERC H730 controller and iDRAC8 Enterprise
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.6GHz
- # of Processors Installed1
- MAX Processors2
- Installed Memory Size256GB
- Ready for virtualisation with 256GB DDR4 memory
- Scales to dual processors with second Xeon socket
- Enterprise RAID performance via PERC H730 controller
- High-speed networking with dual 10GbE and dual 1GbE ports
- Remote management through iDRAC8 Enterprise licence
8-bay 3.5-inch rack server with Xeon E5-2640 v3
This Dell PowerEdge R730 is a 2U rack-mount server fitted with one Intel Xeon E5-2640 v3 processor at 2.6 GHz and 256 GB of DDR4 ECC registered memory. It provides eight 3.5-inch drive bays served by a PERC H730 SAS controller and includes dual 495 W power supplies plus iDRAC8 Enterprise remote management. The unit ships without drives so storage can be added to order.
Suits single-socket workloads needing large
The single-socket configuration and eight large-form-factor bays make it a fit for archive storage, backup targets or virtualisation hosts that prioritise capacity over maximum compute density. Buyers who need both processor sockets populated, 2.5-inch bay density or a GPU-ready chassis should evaluate other platforms.
PERC H730 SAS controller with eight 3.5-inch bays
The installed PERC H730 RAID controller manages up to eight 3.5-inch SATA or SAS drives, defining the storage topology this server can support. Confirm that your drive count, RAID level and throughput requirements match this controller before purchasing.
Points forts
- Ready for virtualisation with 256GB DDR4 memory
- Scales to dual processors with second Xeon socket
- Enterprise RAID performance via PERC H730 controller
- High-speed networking with dual 10GbE and dual 1GbE ports
- Remote management through iDRAC8 Enterprise licence
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.6GHz |
| # of Processors Installed | 1 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 768GB |
| Hard Drive (Installed) | 16,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
What rack depth is needed for the 36-inch Dell PowerEdge R730 chassis?
The server measures 36 inches deep, so a rack with at least 36 inches of usable depth is required for the 8-bay 3.5-inch chassis.
How is the PERC H730 RAID controller connected to the backplane during installation?
The H730 plugs into the dedicated internal PCIe slot and two mini-SAS cables link it to the 8-drive 3.5-inch backplane; the step often missed is seating both cables fully before powering on.
When will the 495-watt redundant power supplies need replacement?
The dual 495W units are hot-swap rated; replace a module when iDRAC8 reports a fault or the amber LED lights, typically after several years of continuous operation.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
