Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Dell PowerEdge R730 2U rack server, matte black front with eight 3.5-inch drive bays

DELL

DELL PowerEdge R730 8x3.5" 1x Xeon E5-2640 v3 2.6GHz 256GB DDR4 No Drive Rack Server

SKU CH-VMMT-G6RD9

2U rack server with eight 3.5-inch drive bays, one Xeon E5-2640 v3 at 2.6GHz, 256GB DDR4 ECC, PERC H730 controller and iDRAC8 Enterprise

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.6GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size256GB
  • Ready for virtualisation with 256GB DDR4 memory
  • Scales to dual processors with second Xeon socket
  • Enterprise RAID performance via PERC H730 controller
  • High-speed networking with dual 10GbE and dual 1GbE ports
  • Remote management through iDRAC8 Enterprise licence

8-bay 3.5-inch rack server with Xeon E5-2640 v3

This Dell PowerEdge R730 is a 2U rack-mount server fitted with one Intel Xeon E5-2640 v3 processor at 2.6 GHz and 256 GB of DDR4 ECC registered memory. It provides eight 3.5-inch drive bays served by a PERC H730 SAS controller and includes dual 495 W power supplies plus iDRAC8 Enterprise remote management. The unit ships without drives so storage can be added to order.

Suits single-socket workloads needing large

The single-socket configuration and eight large-form-factor bays make it a fit for archive storage, backup targets or virtualisation hosts that prioritise capacity over maximum compute density. Buyers who need both processor sockets populated, 2.5-inch bay density or a GPU-ready chassis should evaluate other platforms.

PERC H730 SAS controller with eight 3.5-inch bays

The installed PERC H730 RAID controller manages up to eight 3.5-inch SATA or SAS drives, defining the storage topology this server can support. Confirm that your drive count, RAID level and throughput requirements match this controller before purchasing.

Najważniejsze cechy

  • Ready for virtualisation with 256GB DDR4 memory
  • Scales to dual processors with second Xeon socket
  • Enterprise RAID performance via PERC H730 controller
  • High-speed networking with dual 10GbE and dual 1GbE ports
  • Remote management through iDRAC8 Enterprise licence

Specyfikacja

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.6GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)16,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Pytania dotyczące tego produktu

What rack depth is needed for the 36-inch Dell PowerEdge R730 chassis?

The server measures 36 inches deep, so a rack with at least 36 inches of usable depth is required for the 8-bay 3.5-inch chassis.

How is the PERC H730 RAID controller connected to the backplane during installation?

The H730 plugs into the dedicated internal PCIe slot and two mini-SAS cables link it to the 8-drive 3.5-inch backplane; the step often missed is seating both cables fully before powering on.

When will the 495-watt redundant power supplies need replacement?

The dual 495W units are hot-swap rated; replace a module when iDRAC8 reports a fault or the amber LED lights, typically after several years of continuous operation.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.