NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
DELL
Adds 8 GB of DDR4 2666 MHz ECC memory with a CL1.5 latency 288-pin DIMM for Dell server upgrades
This 8 GB DDR4 module is built for Dell servers that require error-correcting code memory. It operates at 2666 MHz with a CAS latency of 1.5 and uses the standard 288-pin DIMM form factor. The part is supplied new and carries Dell's own qualification.
Dell validates each module through a sustaining qualification process and accepts only first-pass yield components. The black PCB has no LED lighting, keeping the focus on reliability in dense server chassis. Using Dell-certified memory preserves the original system warranty and ensures full technical support coverage.
The PC4-21300 interface caps bandwidth at the rated 2666 MT/s, so workloads needing higher throughput will hit a ceiling with this module. An 8 GB stick also limits total density per channel compared to larger-capacity DIMMs. Systems requiring faster DDR4 speeds or greater per-slot capacity must look beyond this specification.
| Brand | Dell |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin PC RAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL1.5 |
| ECC | ECC |
| Color | Black |
| LED Color | None |
| Sendingarþyngd | 0.45 kg |
| Stærð sendingar | 165 × 50 × 2 mm |
Yes, the PC4 21300 designation means the module is rated for a maximum data rate of 21300 MB/s when installed in a supported Dell system.
The 288-pin form factor matches standard DDR4 DIMM slots in compatible Dell PowerEdge servers; verify your specific model in the Dell Memory Selector.
Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until the retention clips click, then enable ECC in the BIOS if it is not set by default.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?