NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
DELL
Adds 8 GB of DDR4 2666 MHz ECC memory with a CL1.5 latency 288-pin DIMM for Dell server upgrades
This 8 GB DDR4 module is built for Dell servers that require error-correcting code memory. It operates at 2666 MHz with a CAS latency of 1.5 and uses the standard 288-pin DIMM form factor. The part is supplied new and carries Dell's own qualification.
Dell validates each module through a sustaining qualification process and accepts only first-pass yield components. The black PCB has no LED lighting, keeping the focus on reliability in dense server chassis. Using Dell-certified memory preserves the original system warranty and ensures full technical support coverage.
The PC4-21300 interface caps bandwidth at the rated 2666 MT/s, so workloads needing higher throughput will hit a ceiling with this module. An 8 GB stick also limits total density per channel compared to larger-capacity DIMMs. Systems requiring faster DDR4 speeds or greater per-slot capacity must look beyond this specification.
| Brand | Dell |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin PC RAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL1.5 |
| ECC | ECC |
| Color | Black |
| LED Color | None |
| Greutate la expediere | 0.45 kg |
| Dimensiunile coletului | 165 × 50 × 2 mm |
Yes, the PC4 21300 designation means the module is rated for a maximum data rate of 21300 MB/s when installed in a supported Dell system.
The 288-pin form factor matches standard DDR4 DIMM slots in compatible Dell PowerEdge servers; verify your specific model in the Dell Memory Selector.
Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until the retention clips click, then enable ECC in the BIOS if it is not set by default.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?