Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Aqua duplex fiber patch cable with SC and ST connectors, 3.0 mm jacket

Enfain

Enfain OM3 SC-ST Duplex Multimode Fiber Patch Cable 3.0mm Aqua Blue

SKU CH-EVJ0-6S8R4

OM3 duplex multimode patch cord with SC and ST ceramic ferrules, 3.0 mm PVC jacket, 850 nm wavelength, 0.2 dB typical insertion loss and >38 dB return loss

Length 1m

  • OM3 core enables 10 gigabit multimode transmission at 850nm
  • Low insertion loss of .2dB typical and .3dB maximum preserves signal quality
  • High return loss exceeding 38dB minimises back reflection
  • Ceramic ferrules rated for 1000 mating cycles ensure durable connections
  • 0mm PVC jacket with 330mm bend radius suits data centre routing

OM3 SC-ST Duplex Patch Cable

The Enfain OM3 SC-ST duplex multimode fiber patch cable connects network switches, servers and data-centre equipment using 10-gigabit multimode fibre. It is built for installers and IT teams who need reliable 1G, 10G or 40G links over 850 nm wavelength with SC and ST ceramic ferrules.

Push-pull connectors simplify installation

The SC and ST ends use push-pull and bayonet locking so they seat with a firm click. Typical insertion loss is .2 dB and maximum is .3 dB while return loss exceeds 38 dB. The 3.0 mm PVC jacket resists kinking but the minimum bend radius is 330 mm; tighter bends raise loss. Connectors are rated for 1000 mating cycles.

Verify port types and distance budget

Confirm both ends of your link accept SC and ST multimode interfaces and that the 850 nm OM3 core matches your transceiver wavelength. Check the total channel length against your switch specifications because this cable alone does not guarantee a 10G or 40G reach. Operating temperature range is -20 °C to +60 °C.

Helstu kostir

  • OM3 core enables 10 gigabit multimode transmission at 850nm
  • Low insertion loss of .2dB typical and .3dB maximum preserves signal quality
  • High return loss exceeding 38dB minimises back reflection
  • Ceramic ferrules rated for 1000 mating cycles ensure durable connections
  • 0mm PVC jacket with 330mm bend radius suits data centre routing

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How can I verify the link is performing to spec after I connect the SC and ST ends?

Measure insertion loss with a light source and power meter at 850 nm; a reading at or below .2 dB typical and .3 dB maximum confirms the cable is within spec.

What connectors and jacket are included, and is any cleaning tool supplied?

The cable has a duplex SC connector on one end and a duplex ST connector on the other, a 3.0 mm aqua PVC jacket, and ceramic ferrules; no cleaning tools are included.

Which OM3 duplex patch cord should I choose for a 10 GbE run up to 330 m?

Select the OM3 10-gigabit core duplex SC-ST cable; it supports 10 GbE at 850 nm with a 330 m bend radius limit and 1000 mating cycles.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.