Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Aqua blue duplex fiber patch cable with ST connectors on both ends, 15m length, 3.0mm jacket

Enfain

Enfain OM3 ST-ST Duplex Multimode Fiber Patch Cable 15m Aqua Blue

SKU CH-HZG6-VK051

OM3 multimode duplex patch cable with ST connectors, 15 m length, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss, >38 dB return loss

Length 15m

  • Supports 10 Gb links with OM3 10-gigabit core
  • Low 0.2 dB typical insertion loss preserves signal strength
  • High >38 dB return loss cuts back-reflection
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Operates from -20 °C to +60 °C for data-centre use

Enfain OM3 Duplex Patch Cable 15m

This 15-metre duplex multimode patch cable uses an OM3 10-gigabit core with ST connectors on both ends. It operates at an 850 nm wavelength and is built for 1 G, 10 G and 40 G Ethernet links in switches, servers and data-centre racks.

Sustained 10G and 40G throughput

Typical insertion loss is 0.2 dB and maximum insertion loss is 0.3 dB, while return loss exceeds 38 dB. These figures stay stable over long runs, so the link keeps its error budget during continuous high-speed traffic rather than only in short bursts.

PVC jacket, ceramic ferrules, wide temperature range

The 3.0 mm PVC jacket protects the fibres and the ceramic ferrules withstand 1000 mating cycles. The cable is rated for an operating range of -20 °C to +60 °C and a minimum bending radius of 330 mm, so it handles normal rack routing without excess attenuation or mechanical fatigue.

Helstu kostir

  • Supports 10 Gb links with OM3 10-gigabit core
  • Low 0.2 dB typical insertion loss preserves signal strength
  • High >38 dB return loss cuts back-reflection
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Operates from -20 °C to +60 °C for data-centre use

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the 3.0 mm PVC jacket and 330 mm bend radius limit heat buildup when the 15 m cable runs continuously at 850 nm?

The cable operates from -20 °C to +60 °C with a 330 mm minimum bend radius, so normal rack routing will not cause heat-related degradation.

Which patch panels or switches must already have ST connectors to plug this duplex OM3 cord straight in?

Any device or panel with ST ports — such as legacy switches, servers or distribution frames — will accept the duplex ST connectors directly.

Will the 0.2 dB typical insertion loss at 850 nm cause errors on 1 Gbit links that share the same path?

Typical loss is 0.2 dB and maximum 0.3 dB at 850 nm, well within the margin for 1 Gbit and 10 Gbit multimode links.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.