我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Enfain

Enfain OM3 ST-ST Duplex Multimode Fiber Patch Cable 15m Aqua Blue

SKU CH-HZG6-VK051

OM3 multimode duplex patch cable with ST connectors, 15 m length, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss, >38 dB return loss

Length 15m

  • Supports 10 Gb links with OM3 10-gigabit core
  • Low 0.2 dB typical insertion loss preserves signal strength
  • High >38 dB return loss cuts back-reflection
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Operates from -20 °C to +60 °C for data-centre use

Enfain OM3 Duplex Patch Cable 15m

This 15-metre duplex multimode patch cable uses an OM3 10-gigabit core with ST connectors on both ends. It operates at an 850 nm wavelength and is built for 1 G, 10 G and 40 G Ethernet links in switches, servers and data-centre racks.

Sustained 10G and 40G throughput

Typical insertion loss is 0.2 dB and maximum insertion loss is 0.3 dB, while return loss exceeds 38 dB. These figures stay stable over long runs, so the link keeps its error budget during continuous high-speed traffic rather than only in short bursts.

PVC jacket, ceramic ferrules, wide temperature range

The 3.0 mm PVC jacket protects the fibres and the ceramic ferrules withstand 1000 mating cycles. The cable is rated for an operating range of -20 °C to +60 °C and a minimum bending radius of 330 mm, so it handles normal rack routing without excess attenuation or mechanical fatigue.

商品特色

  • Supports 10 Gb links with OM3 10-gigabit core
  • Low 0.2 dB typical insertion loss preserves signal strength
  • High >38 dB return loss cuts back-reflection
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Operates from -20 °C to +60 °C for data-centre use

商品規格

本商品目前尚未公佈規格。

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does the 3.0 mm PVC jacket and 330 mm bend radius limit heat buildup when the 15 m cable runs continuously at 850 nm?

The cable operates from -20 °C to +60 °C with a 330 mm minimum bend radius, so normal rack routing will not cause heat-related degradation.

Which patch panels or switches must already have ST connectors to plug this duplex OM3 cord straight in?

Any device or panel with ST ports — such as legacy switches, servers or distribution frames — will accept the duplex ST connectors directly.

Will the 0.2 dB typical insertion loss at 850 nm cause errors on 1 Gbit links that share the same path?

Typical loss is 0.2 dB and maximum 0.3 dB at 850 nm, well within the margin for 1 Gbit and 10 Gbit multimode links.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。