我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Aqua blue duplex fiber cable with SC and ST connectors, 15m length

Enfain

Enfain OM3 SC-ST Duplex Multimode Fiber Patch Cable 15m

SKU CH-Z8ZG-Q6CJC

OM3 multimode duplex patch cable with SC and ST connectors for 10 Gbit links at 850 nm over 15 m

Length 15m

  • OM3 core supports 10G and 40G links
  • Duplex SC-ST connectors fit switch and server ports
  • 0 mm PVC jacket protects the 850nm multimode fibers
  • Typical insertion loss .2 dB keeps signal strong
  • Ceramic ferrules rated for 1000 mating cycles

15-metre OM3 duplex patch cable

This 15-metre OM3 multimode fibre patch cable uses SC and ST connectors in a duplex arrangement. A 3.0 mm PVC jacket protects the 10-gigabit core that operates at an 850 nm wavelength. It is built for indoor links between switches, servers and patch panels in data-centre or campus networks.

Suits installers needing SC-to-ST links

The cable fits installations where one end terminates in an SC port and the other in an ST port, supporting 1 G, 10 G and 40 G Ethernet over multimode fibre. Buyers who require matching connectors on both ends, single-mode fibre, or a different jacket rating should select another product.

Verify connector types and bend space

Confirm that your equipment presents SC and ST interfaces and that the 330 mm minimum bending radius can be accommodated in your rack or tray. The operating range spans -20 °C to +60 °C, and the connectors are rated for 1000 mating cycles.

商品特色

  • OM3 core supports 10G and 40G links
  • Duplex SC-ST connectors fit switch and server ports
  • 0 mm PVC jacket protects the 850nm multimode fibers
  • Typical insertion loss .2 dB keeps signal strong
  • Ceramic ferrules rated for 1000 mating cycles

商品規格

本商品目前尚未公佈規格。

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What connectors must my switch and server already have to use this 15m duplex cable?

One end uses an SC connector and the other an ST connector, so the linked ports must provide matching SC and ST receptacles.

Will the 850 nm wavelength and OM3 core work with legacy 1 Gbps transceivers I keep in the rack?

Yes, the OM3 10-gigabit core at 850 nm is backward-compatible with 1 Gbps multimode optics, so older transceivers will operate normally.

How can I verify the link is performing within spec after installation?

Measure insertion loss with a light source and power meter; a reading at or below 0.3 dB confirms the cable meets its maximum specification.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。