Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Aqua blue duplex fiber cable with SC and ST connectors, 15m length

Enfain

Enfain OM3 SC-ST Duplex Multimode Fiber Patch Cable 15m

SKU CH-Z8ZG-Q6CJC

OM3 multimode duplex patch cable with SC and ST connectors for 10 Gbit links at 850 nm over 15 m

Length 15m

  • OM3 core supports 10G and 40G links
  • Duplex SC-ST connectors fit switch and server ports
  • 0 mm PVC jacket protects the 850nm multimode fibers
  • Typical insertion loss .2 dB keeps signal strong
  • Ceramic ferrules rated for 1000 mating cycles

15-metre OM3 duplex patch cable

This 15-metre OM3 multimode fibre patch cable uses SC and ST connectors in a duplex arrangement. A 3.0 mm PVC jacket protects the 10-gigabit core that operates at an 850 nm wavelength. It is built for indoor links between switches, servers and patch panels in data-centre or campus networks.

Suits installers needing SC-to-ST links

The cable fits installations where one end terminates in an SC port and the other in an ST port, supporting 1 G, 10 G and 40 G Ethernet over multimode fibre. Buyers who require matching connectors on both ends, single-mode fibre, or a different jacket rating should select another product.

Verify connector types and bend space

Confirm that your equipment presents SC and ST interfaces and that the 330 mm minimum bending radius can be accommodated in your rack or tray. The operating range spans -20 °C to +60 °C, and the connectors are rated for 1000 mating cycles.

Punti di forza

  • OM3 core supports 10G and 40G links
  • Duplex SC-ST connectors fit switch and server ports
  • 0 mm PVC jacket protects the 850nm multimode fibers
  • Typical insertion loss .2 dB keeps signal strong
  • Ceramic ferrules rated for 1000 mating cycles

Caratteristiche tecniche

Nessuna caratteristica ancora pubblicata per questo articolo.

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

What connectors must my switch and server already have to use this 15m duplex cable?

One end uses an SC connector and the other an ST connector, so the linked ports must provide matching SC and ST receptacles.

Will the 850 nm wavelength and OM3 core work with legacy 1 Gbps transceivers I keep in the rack?

Yes, the OM3 10-gigabit core at 850 nm is backward-compatible with 1 Gbps multimode optics, so older transceivers will operate normally.

How can I verify the link is performing within spec after installation?

Measure insertion loss with a light source and power meter; a reading at or below 0.3 dB confirms the cable meets its maximum specification.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.