Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Aqua blue duplex fiber cable with SC and ST connectors, 15m length

Enfain

Enfain OM3 SC-ST Duplex Multimode Fiber Patch Cable 15m

SKU CH-Z8ZG-Q6CJC

OM3 multimode duplex patch cable with SC and ST connectors for 10 Gbit links at 850 nm over 15 m

Length 15m

  • OM3 core supports 10G and 40G links
  • Duplex SC-ST connectors fit switch and server ports
  • 0 mm PVC jacket protects the 850nm multimode fibers
  • Typical insertion loss .2 dB keeps signal strong
  • Ceramic ferrules rated for 1000 mating cycles

15-metre OM3 duplex patch cable

This 15-metre OM3 multimode fibre patch cable uses SC and ST connectors in a duplex arrangement. A 3.0 mm PVC jacket protects the 10-gigabit core that operates at an 850 nm wavelength. It is built for indoor links between switches, servers and patch panels in data-centre or campus networks.

Suits installers needing SC-to-ST links

The cable fits installations where one end terminates in an SC port and the other in an ST port, supporting 1 G, 10 G and 40 G Ethernet over multimode fibre. Buyers who require matching connectors on both ends, single-mode fibre, or a different jacket rating should select another product.

Verify connector types and bend space

Confirm that your equipment presents SC and ST interfaces and that the 330 mm minimum bending radius can be accommodated in your rack or tray. The operating range spans -20 °C to +60 °C, and the connectors are rated for 1000 mating cycles.

Ciri-ciri utama

  • OM3 core supports 10G and 40G links
  • Duplex SC-ST connectors fit switch and server ports
  • 0 mm PVC jacket protects the 850nm multimode fibers
  • Typical insertion loss .2 dB keeps signal strong
  • Ceramic ferrules rated for 1000 mating cycles

Spesifikasi

Belum ada spesifikasi diterbitkan untuk produk ini.

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

What connectors must my switch and server already have to use this 15m duplex cable?

One end uses an SC connector and the other an ST connector, so the linked ports must provide matching SC and ST receptacles.

Will the 850 nm wavelength and OM3 core work with legacy 1 Gbps transceivers I keep in the rack?

Yes, the OM3 10-gigabit core at 850 nm is backward-compatible with 1 Gbps multimode optics, so older transceivers will operate normally.

How can I verify the link is performing within spec after installation?

Measure insertion loss with a light source and power meter; a reading at or below 0.3 dB confirms the cable meets its maximum specification.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.