Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Square black 60×60×25 mm axial case fan with centre hub and mounting holes

Fans

Fans AD0624HB-A70GLSize 60×60×25 mm 12 V 0.15 A 3.6 W 4500 RPM 24.49 CFM case fan

SKU CH-CGQA-QFXEG MPN AD0624HB-A70GLSize

A 60 × 60 × 25 mm case fan delivering 24.49 CFM at 4500 RPM on 12 V power

  • 12 V operation with low 0.15 A draw
  • 6 W power consumption for efficient cooling
  • 4500 RPM speed delivers 24.49 CFM airflow
  • Compact 60×60×25 mm frame fits tight builds
  • New original ADDA Taiwan manufacture ensures reliability

Compact 60 mm frame for tight builds

This ADDA case fan measures 60 by 60 by 25 mm and runs on a 12 V supply drawing 0.15 A. It is built for industrial and embedded systems where space is limited and a low-profile axial fan is required. The new original unit suits equipment racks, medical devices and small-form-factor PCs.

4500 RPM airflow rating

At 4500 RPM the fan delivers 24.49 CFM of air volume while consuming 3.6 W. This single figure determines whether the cooling capacity matches the thermal load of the target enclosure. Verify the required airflow against your system design before ordering.

No bundled accessories included

The product ships as the bare fan unit without mounting screws, cables or speed-control adapters. Installers must source appropriate fixings and a compatible 12 V power header or molex connector separately.

Helstu kostir

  • 12 V operation with low 0.15 A draw
  • 6 W power consumption for efficient cooling
  • 4500 RPM speed delivers 24.49 CFM airflow
  • Compact 60×60×25 mm frame fits tight builds
  • New original ADDA Taiwan manufacture ensures reliability

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

How much airflow will the 24.49 CFM rating actually move inside a typical case?

At 4500 RPM the fan delivers 24.49 CFM, enough to push a steady stream of air through a 60 mm vent or heatsink in a compact chassis.

The label says 12 V but the supplier title mentions 24 V — which voltage does the fan really use?

The electrical specs list 12 V and 0.15 A for 3.6 W, so the fan is designed for a 12 V DC header or supply.

Will the 60 × 60 × 25 mm frame fit a standard 60 mm mounting pattern?

Yes, the 60 mm square frame with 25 mm thickness matches the common 6025 mounting holes used on many small-form-factor cases and radiators.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.