Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Square black 60×60×25 mm axial case fan with centre hub and mounting holes

Fans

Fans AD0624HB-A70GLSize 60×60×25 mm 12 V 0.15 A 3.6 W 4500 RPM 24.49 CFM case fan

SKU CH-CGQA-QFXEG MPN AD0624HB-A70GLSize

A 60 × 60 × 25 mm case fan delivering 24.49 CFM at 4500 RPM on 12 V power

  • 12 V operation with low 0.15 A draw
  • 6 W power consumption for efficient cooling
  • 4500 RPM speed delivers 24.49 CFM airflow
  • Compact 60×60×25 mm frame fits tight builds
  • New original ADDA Taiwan manufacture ensures reliability

Compact 60 mm frame for tight builds

This ADDA case fan measures 60 by 60 by 25 mm and runs on a 12 V supply drawing 0.15 A. It is built for industrial and embedded systems where space is limited and a low-profile axial fan is required. The new original unit suits equipment racks, medical devices and small-form-factor PCs.

4500 RPM airflow rating

At 4500 RPM the fan delivers 24.49 CFM of air volume while consuming 3.6 W. This single figure determines whether the cooling capacity matches the thermal load of the target enclosure. Verify the required airflow against your system design before ordering.

No bundled accessories included

The product ships as the bare fan unit without mounting screws, cables or speed-control adapters. Installers must source appropriate fixings and a compatible 12 V power header or molex connector separately.

Poudarki

  • 12 V operation with low 0.15 A draw
  • 6 W power consumption for efficient cooling
  • 4500 RPM speed delivers 24.49 CFM airflow
  • Compact 60×60×25 mm frame fits tight builds
  • New original ADDA Taiwan manufacture ensures reliability

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How much airflow will the 24.49 CFM rating actually move inside a typical case?

At 4500 RPM the fan delivers 24.49 CFM, enough to push a steady stream of air through a 60 mm vent or heatsink in a compact chassis.

The label says 12 V but the supplier title mentions 24 V — which voltage does the fan really use?

The electrical specs list 12 V and 0.15 A for 3.6 W, so the fan is designed for a 12 V DC header or supply.

Will the 60 × 60 × 25 mm frame fit a standard 60 mm mounting pattern?

Yes, the 60 mm square frame with 25 mm thickness matches the common 6025 mounting holes used on many small-form-factor cases and radiators.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.