暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Fans

Fans AD0624HB-A70GLSize 60×60×25 mm 12 V 0.15 A 3.6 W 4500 RPM 24.49 CFM case fan

SKU CH-CGQA-QFXEG MPN AD0624HB-A70GLSize

A 60 × 60 × 25 mm case fan delivering 24.49 CFM at 4500 RPM on 12 V power

  • 12 V operation with low 0.15 A draw
  • 6 W power consumption for efficient cooling
  • 4500 RPM speed delivers 24.49 CFM airflow
  • Compact 60×60×25 mm frame fits tight builds
  • New original ADDA Taiwan manufacture ensures reliability

Compact 60 mm frame for tight builds

This ADDA case fan measures 60 by 60 by 25 mm and runs on a 12 V supply drawing 0.15 A. It is built for industrial and embedded systems where space is limited and a low-profile axial fan is required. The new original unit suits equipment racks, medical devices and small-form-factor PCs.

4500 RPM airflow rating

At 4500 RPM the fan delivers 24.49 CFM of air volume while consuming 3.6 W. This single figure determines whether the cooling capacity matches the thermal load of the target enclosure. Verify the required airflow against your system design before ordering.

No bundled accessories included

The product ships as the bare fan unit without mounting screws, cables or speed-control adapters. Installers must source appropriate fixings and a compatible 12 V power header or molex connector separately.

特長

  • 12 V operation with low 0.15 A draw
  • 6 W power consumption for efficient cooling
  • 4500 RPM speed delivers 24.49 CFM airflow
  • Compact 60×60×25 mm frame fits tight builds
  • New original ADDA Taiwan manufacture ensures reliability

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How much airflow will the 24.49 CFM rating actually move inside a typical case?

At 4500 RPM the fan delivers 24.49 CFM, enough to push a steady stream of air through a 60 mm vent or heatsink in a compact chassis.

The label says 12 V but the supplier title mentions 24 V — which voltage does the fan really use?

The electrical specs list 12 V and 0.15 A for 3.6 W, so the fan is designed for a 12 V DC header or supply.

Will the 60 × 60 × 25 mm frame fit a standard 60 mm mounting pattern?

Yes, the 60 mm square frame with 25 mm thickness matches the common 6025 mounting holes used on many small-form-factor cases and radiators.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。