Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
120 mm square axial fan with black frame and blades

Fans

Fans MMF-12DS24DS-RP1Size 120mm 24V 0.36A case fan

SKU CH-TY4E-FGSNA MPN MMF-12DS24DS-RP1Size

A 120 mm axial case fan running at 24 V and 0.36 A with a 38 mm frame depth

  • Axial design enables compact 38mm depth installation
  • 24V 0.36A rating delivers efficient airflow performance
  • 120mm frame fits standard case fan mounts
  • Low noise operation suits noise-sensitive environments
  • Trusted Mitsubishi engineering ensures reliable cooling

Mitsubishi 120 mm 24 V axial fan

The Mitsubishi MMF-12DS24DS-RP1 is a 120 mm square axial fan that runs on 24 V DC and draws 0.36 A. It is built for industrial and embedded systems that need steady airflow in a 38 mm deep frame.

Replaces noisy or undersized 120 mm fans

Use this unit when an existing 120 mm fan cannot deliver enough static pressure or runs too loud for the enclosure. The jump is worth it when the original fan has failed, when the chassis depth is limited to 38 mm, or when the power rail is fixed at 24 V.

Standard four-screw mounting

The fan fits the common 120 mm hole pattern with four screws and connects via its two-wire lead. Verify that the supply is 24 V DC and that the connector polarity matches; reverse voltage will damage the motor. Ensure the 38 mm depth clears any nearby components or cable routes.

Helstu kostir

  • Axial design enables compact 38mm depth installation
  • 24V 0.36A rating delivers efficient airflow performance
  • 120mm frame fits standard case fan mounts
  • Low noise operation suits noise-sensitive environments
  • Trusted Mitsubishi engineering ensures reliable cooling

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

What mounting hole spacing does the 120 mm frame use?

The fan has a 120 mm square frame with standard corner mounting holes for 120 mm fan positions.

How is the 24 V fan connected and what polarity mistake should be avoided?

Connect the two power leads to a 24 V DC source; reversing the polarity will prevent the fan from spinning.

When should the fan be replaced based on its rated current draw?

If the running current rises noticeably above 0.36 A or the fan develops unusual noise, plan a replacement.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.