Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
120 mm square axial fan with black frame and blades

Fans

Fans MMF-12DS24DS-RP1Size 120mm 24V 0.36A case fan

SKU CH-TY4E-FGSNA MPN MMF-12DS24DS-RP1Size

A 120 mm axial case fan running at 24 V and 0.36 A with a 38 mm frame depth

  • Axial design enables compact 38mm depth installation
  • 24V 0.36A rating delivers efficient airflow performance
  • 120mm frame fits standard case fan mounts
  • Low noise operation suits noise-sensitive environments
  • Trusted Mitsubishi engineering ensures reliable cooling

Mitsubishi 120 mm 24 V axial fan

The Mitsubishi MMF-12DS24DS-RP1 is a 120 mm square axial fan that runs on 24 V DC and draws 0.36 A. It is built for industrial and embedded systems that need steady airflow in a 38 mm deep frame.

Replaces noisy or undersized 120 mm fans

Use this unit when an existing 120 mm fan cannot deliver enough static pressure or runs too loud for the enclosure. The jump is worth it when the original fan has failed, when the chassis depth is limited to 38 mm, or when the power rail is fixed at 24 V.

Standard four-screw mounting

The fan fits the common 120 mm hole pattern with four screws and connects via its two-wire lead. Verify that the supply is 24 V DC and that the connector polarity matches; reverse voltage will damage the motor. Ensure the 38 mm depth clears any nearby components or cable routes.

Prednosti

  • Axial design enables compact 38mm depth installation
  • 24V 0.36A rating delivers efficient airflow performance
  • 120mm frame fits standard case fan mounts
  • Low noise operation suits noise-sensitive environments
  • Trusted Mitsubishi engineering ensures reliable cooling

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

What mounting hole spacing does the 120 mm frame use?

The fan has a 120 mm square frame with standard corner mounting holes for 120 mm fan positions.

How is the 24 V fan connected and what polarity mistake should be avoided?

Connect the two power leads to a 24 V DC source; reversing the polarity will prevent the fan from spinning.

When should the fan be replaced based on its rated current draw?

If the running current rises noticeably above 0.36 A or the fan develops unusual noise, plan a replacement.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.