Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
120 mm square axial fan with black frame and blades

Fans

Fans MMF-12DS24DS-RP1Size 120mm 24V 0.36A case fan

SKU CH-TY4E-FGSNA MPN MMF-12DS24DS-RP1Size

A 120 mm axial case fan running at 24 V and 0.36 A with a 38 mm frame depth

  • Axial design enables compact 38mm depth installation
  • 24V 0.36A rating delivers efficient airflow performance
  • 120mm frame fits standard case fan mounts
  • Low noise operation suits noise-sensitive environments
  • Trusted Mitsubishi engineering ensures reliable cooling

Mitsubishi 120 mm 24 V axial fan

The Mitsubishi MMF-12DS24DS-RP1 is a 120 mm square axial fan that runs on 24 V DC and draws 0.36 A. It is built for industrial and embedded systems that need steady airflow in a 38 mm deep frame.

Replaces noisy or undersized 120 mm fans

Use this unit when an existing 120 mm fan cannot deliver enough static pressure or runs too loud for the enclosure. The jump is worth it when the original fan has failed, when the chassis depth is limited to 38 mm, or when the power rail is fixed at 24 V.

Standard four-screw mounting

The fan fits the common 120 mm hole pattern with four screws and connects via its two-wire lead. Verify that the supply is 24 V DC and that the connector polarity matches; reverse voltage will damage the motor. Ensure the 38 mm depth clears any nearby components or cable routes.

Puncte forte

  • Axial design enables compact 38mm depth installation
  • 24V 0.36A rating delivers efficient airflow performance
  • 120mm frame fits standard case fan mounts
  • Low noise operation suits noise-sensitive environments
  • Trusted Mitsubishi engineering ensures reliable cooling

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

What mounting hole spacing does the 120 mm frame use?

The fan has a 120 mm square frame with standard corner mounting holes for 120 mm fan positions.

How is the 24 V fan connected and what polarity mistake should be avoided?

Connect the two power leads to a 24 V DC source; reversing the polarity will prevent the fan from spinning.

When should the fan be replaced based on its rated current draw?

If the running current rises noticeably above 0.36 A or the fan develops unusual noise, plan a replacement.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.