Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 3.5 inch bare hard drive with exposed circuit board

HGST

HGST IC35L180AVV207 180GB 7200 RPM 8MB Cache IDE Ultra ATA100 3.5" internal hard drive

SKU CH-BMZK-M4W8C MPN IC35L180AVV207

A 180 GB, 7200 RPM IDE desktop drive with 8 MB cache and 8.5 ms seek time

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA100 / ATA-6
  • Capacity180GB
  • RPM7200 RPM
  • Cache8MB
  • Average Seek Time8.5ms
  • Faster data access with 7200 RPM spindle speed
  • Responsive performance backed by 8MB cache buffer
  • Broad compatibility through IDE Ultra ATA100 interface
  • Quiet, cool operation via Fluid Dynamic Bearing motor
  • Reliable data integrity with S.M.A.R.T. self-monitoring

Deskstar 180GXP 180GB IDE drive

This new HGST Deskstar 180GXP model IC35L180AVV207 is a 3.5 inch internal hard drive with a 180GB capacity. It spins at 7200 RPM and includes an 8MB cache on an IDE Ultra ATA100 interface. The bare drive arrives without cables or mounting hardware.

Suits legacy IDE systems; not for other interfaces

The drive serves machines that still use a parallel ATA connection and need a genuine replacement part. It fits 3.5 inch bays in older desktops or industrial equipment that recognise the Deskstar 180GXP series. Builders whose motherboards lack an IDE header cannot install this unit.

IDE Ultra ATA100 decides compatibility

The single specification that determines fit is the IDE Ultra ATA100 interface, also labelled ATA-6. Only systems with a matching 40-pin connector and BIOS support for 180GB will recognise the full capacity. No adapter or converter is included in the bare drive package.

Helstu kostir

  • Faster data access with 7200 RPM spindle speed
  • Responsive performance backed by 8MB cache buffer
  • Broad compatibility through IDE Ultra ATA100 interface
  • Quiet, cool operation via Fluid Dynamic Bearing motor
  • Reliable data integrity with S.M.A.R.T. self-monitoring

Tæknilýsing

BrandHitachi GST
SeriesDeskstar 180GXP
ModelIC35L180AVV207 - 07N9216
PackagingBare Drive
InterfaceIDE Ultra ATA100 / ATA-6
Capacity180GB
RPM7200 RPM
Cache8MB
Average Seek Time8.5ms
Average Latency4.17ms
FeaturesLoad/unload head ramps
Fluid Dynamic Bearing (FDB) motors
Differential read channel
Internal thermal monitor
Drive Fitness Test (DFT)
S.M.A.R.T Self Test
True-Track Servo
No-ID sector formatting
Form Factor3.5"
Sendingarþyngd1.36 kg
Stærð sendingar152 × 102 × 25 mm

Spurningar um þessa vöru

How long will the Fluid Dynamic Bearing motor and load/unload head ramps last before they need replacement?

The Fluid Dynamic Bearing motor and load/unload head ramps are built into the drive and have no user-serviceable replacement interval; the drive itself is replaced when it reaches end of life.

Will the 7200 RPM spindle and 8.5 ms average seek time become the bottleneck during continuous read-write workloads?

Under sustained use the 7200 RPM spindle and 8.5 ms average seek time set the mechanical throughput ceiling, so random I/O latency will be the first limit you encounter.

How much noise and heat does the 3.5 inch 7200 RPM mechanism produce when running all day?

The 3.5 inch 7200 RPM mechanism with Fluid Dynamic Bearing motor runs quietly for a desktop drive, and the internal thermal monitor helps manage temperature during all-day operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.