SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
HGST
A 180 GB, 7200 RPM IDE desktop drive with 8 MB cache and 8.5 ms seek time
This new HGST Deskstar 180GXP model IC35L180AVV207 is a 3.5 inch internal hard drive with a 180GB capacity. It spins at 7200 RPM and includes an 8MB cache on an IDE Ultra ATA100 interface. The bare drive arrives without cables or mounting hardware.
The drive serves machines that still use a parallel ATA connection and need a genuine replacement part. It fits 3.5 inch bays in older desktops or industrial equipment that recognise the Deskstar 180GXP series. Builders whose motherboards lack an IDE header cannot install this unit.
The single specification that determines fit is the IDE Ultra ATA100 interface, also labelled ATA-6. Only systems with a matching 40-pin connector and BIOS support for 180GB will recognise the full capacity. No adapter or converter is included in the bare drive package.
| Brand | Hitachi GST |
|---|---|
| Series | Deskstar 180GXP |
| Model | IC35L180AVV207 - 07N9216 |
| Packaging | Bare Drive |
| Interface | IDE Ultra ATA100 / ATA-6 |
| Capacity | 180GB |
| RPM | 7200 RPM |
| Cache | 8MB |
| Average Seek Time | 8.5ms |
| Average Latency | 4.17ms |
| Features | Load/unload head ramps Fluid Dynamic Bearing (FDB) motors Differential read channel Internal thermal monitor Drive Fitness Test (DFT) S.M.A.R.T Self Test True-Track Servo No-ID sector formatting |
| Form Factor | 3.5" |
| Тегло на пратката | 1.36 kg |
| Размери на опаковката | 152 × 102 × 25 mm |
The Fluid Dynamic Bearing motor and load/unload head ramps are built into the drive and have no user-serviceable replacement interval; the drive itself is replaced when it reaches end of life.
Under sustained use the 7200 RPM spindle and 8.5 ms average seek time set the mechanical throughput ceiling, so random I/O latency will be the first limit you encounter.
The 3.5 inch 7200 RPM mechanism with Fluid Dynamic Bearing motor runs quietly for a desktop drive, and the internal thermal monitor helps manage temperature during all-day operation.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?