SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
HGST
A 180 GB, 7200 RPM IDE desktop drive with 8 MB cache and 8.5 ms seek time
This new HGST Deskstar 180GXP model IC35L180AVV207 is a 3.5 inch internal hard drive with a 180GB capacity. It spins at 7200 RPM and includes an 8MB cache on an IDE Ultra ATA100 interface. The bare drive arrives without cables or mounting hardware.
The drive serves machines that still use a parallel ATA connection and need a genuine replacement part. It fits 3.5 inch bays in older desktops or industrial equipment that recognise the Deskstar 180GXP series. Builders whose motherboards lack an IDE header cannot install this unit.
The single specification that determines fit is the IDE Ultra ATA100 interface, also labelled ATA-6. Only systems with a matching 40-pin connector and BIOS support for 180GB will recognise the full capacity. No adapter or converter is included in the bare drive package.
| Brand | Hitachi GST |
|---|---|
| Series | Deskstar 180GXP |
| Model | IC35L180AVV207 - 07N9216 |
| Packaging | Bare Drive |
| Interface | IDE Ultra ATA100 / ATA-6 |
| Capacity | 180GB |
| RPM | 7200 RPM |
| Cache | 8MB |
| Average Seek Time | 8.5ms |
| Average Latency | 4.17ms |
| Features | Load/unload head ramps Fluid Dynamic Bearing (FDB) motors Differential read channel Internal thermal monitor Drive Fitness Test (DFT) S.M.A.R.T Self Test True-Track Servo No-ID sector formatting |
| Form Factor | 3.5" |
| Lähetyspaino | 1.36 kg |
| Pakkauksen mitat | 152 × 102 × 25 mm |
The Fluid Dynamic Bearing motor and load/unload head ramps are built into the drive and have no user-serviceable replacement interval; the drive itself is replaced when it reaches end of life.
Under sustained use the 7200 RPM spindle and 8.5 ms average seek time set the mechanical throughput ceiling, so random I/O latency will be the first limit you encounter.
The 3.5 inch 7200 RPM mechanism with Fluid Dynamic Bearing motor runs quietly for a desktop drive, and the internal thermal monitor helps manage temperature during all-day operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?