Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black SATA to USB 3.0 adapter cable with 12V power supply

IHDAPP

IHDAPP SATA to USB 3.0 Adapter 2.5 3.5 inch with 12V 2A Power Supply

SKU CH-Q1M8-DEQ7J

Connects 2.5" or 3.5" SATA drives via USB 3.0 at up to 5 Gbps with UASP, includes 12 V 2 A power supply

  • Changer TypeUSB to SATA
  • Connector A1 x USB 3.0
  • Connector B1 x SATA III

Model Standard

  • Connect 2.5" or 3.5" SATA drives externally via USB 3.0
  • Transfer data up to 5 Gbps with UASP acceleration
  • Plug-and-play hot-swap without installing drives in enclosures
  • Works with Windows, Mac OS, PS4 and Xbox
  • Includes 12 V 2 A power adapter for 3.5" drives

Connect 2.5 and 3.5 SATA drives via USB 3.0

This adapter lets any standard 2.5 inch or 3.5 inch SATA hard drive or solid-state drive connect to a USB 3.0 port on a computer or laptop. It is aimed at users who need quick access to bare drives for data migration, cloning, backup or recovery without installing them inside an enclosure. The included 12V 2A power supply ensures 3.5 inch drives receive adequate power.

UASP support and plug-and-play convenience

The cable uses a USB 3.0 connector on one end and a combined 7+15 pin SATA III connector on the other, plus a DC jack for the external power adapter. UASP capability reduces processor overhead by 80 percent and can deliver up to 70 percent faster transfers than traditional USB 3.0 when the host also supports UASP. Hot-swap and plug-and-play operation mean drives can be swapped without rebooting.

Upgrade from slower USB 2.0 adapters

If you have been limited to USB 2.0 speeds or have had to open a case to reach SATA data, this adapter removes that bottleneck and physical hassle. The jump is worth it when moving large media libraries, cloning system drives or reviving older 3.5 inch desktop drives on a modern laptop that lacks internal drive bays.

Helstu kostir

  • Connect 2.5" or 3.5" SATA drives externally via USB 3.0
  • Transfer data up to 5 Gbps with UASP acceleration
  • Plug-and-play hot-swap without installing drives in enclosures
  • Works with Windows, Mac OS, PS4 and Xbox
  • Includes 12 V 2 A power adapter for 3.5" drives

Tæknilýsing

Changer TypeUSB to SATA
Connector A1 x USB 3.0
Connector B1 x SATA III

Aðrar útgáfur af þessari vöru

1 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What practical speed does the USB 3.0 interface cap at when UASP is active?

The adapter reaches up to 5 Gbps with UASP enabled, which is 70% faster than standard USB 3.0 and cuts processor load by 80%.

Which drive sizes and power needs does the 12V 2A supply cover?

It powers both 2.5" and 3.5" SATA drives; the 12V 2A adapter connects via the DC-Jack port on the cable.

How do you install it, and which step is often missed?

Plug the SATA connector into the drive, attach the USB 3.0 end to the computer, connect the 12V 2A power supply to the DC-Jack, then power on — forgetting the external power brick is the common error.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.