IHDAPP USB 3.0 to SATA Adapter Cable 22 pin 40 cm
- USB to SATA
- 1 x USB 3.0
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
IHDAPP
Connects 2.5" or 3.5" SATA drives via USB 3.0 at up to 5 Gbps with UASP, includes 12 V 2 A power supply
Model Standard
This adapter lets any standard 2.5 inch or 3.5 inch SATA hard drive or solid-state drive connect to a USB 3.0 port on a computer or laptop. It is aimed at users who need quick access to bare drives for data migration, cloning, backup or recovery without installing them inside an enclosure. The included 12V 2A power supply ensures 3.5 inch drives receive adequate power.
The cable uses a USB 3.0 connector on one end and a combined 7+15 pin SATA III connector on the other, plus a DC jack for the external power adapter. UASP capability reduces processor overhead by 80 percent and can deliver up to 70 percent faster transfers than traditional USB 3.0 when the host also supports UASP. Hot-swap and plug-and-play operation mean drives can be swapped without rebooting.
If you have been limited to USB 2.0 speeds or have had to open a case to reach SATA data, this adapter removes that bottleneck and physical hassle. The jump is worth it when moving large media libraries, cloning system drives or reviving older 3.5 inch desktop drives on a modern laptop that lacks internal drive bays.
| Changer Type | USB to SATA |
|---|---|
| Connector A | 1 x USB 3.0 |
| Connector B | 1 x SATA III |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The adapter reaches up to 5 Gbps with UASP enabled, which is 70% faster than standard USB 3.0 and cuts processor load by 80%.
It powers both 2.5" and 3.5" SATA drives; the 12V 2A adapter connects via the DC-Jack port on the cable.
Plug the SATA connector into the drive, attach the USB 3.0 end to the computer, connect the 12V 2A power supply to the DC-Jack, then power on — forgetting the external power brick is the common error.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟